Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2U rack server with front drive bays and rail kit

HPE

HPE ProLiant DL380 Gen11 2U rack server dual Xeon 5416s 16-core 2.00 GHz 1TB DDR5 61.44TB SATA SSD

SKU CH-PTQT-PYXND

A 2U rack server with dual 16-core Xeon 5416s processors, 1TB DDR5 memory and 61.44TB of enterprise SATA SSD storage

  • Dual 16-core Xeon 5416s processors handle heavy virtualised workloads
  • 1 TB DDR5-4800 ECC memory supports large-scale databases and analytics
  • 44 TB enterprise SATA SSD array provides high-capacity flash storage
  • Redundant hot-swap power supplies keep the server running during a module failure
  • iLO 6 remote management enables lights-out provisioning and monitoring

Dual Xeon 5416s 2U server for virtualized workloads

The HPE ProLiant DL380 Gen11 is a 2U rack server built around two Xeon Gold 5416s processors, each with 16 cores at 2.00 GHz and up to 4.00 GHz turbo. It ships with 1TB of DDR5-4800 ECC buffered memory and 61.44TB of enterprise SATA SSD storage. The platform targets enterprises running databases, virtualization and mixed application stacks.

Memory and drives ship loose for on-site assembly

Hard drives and memory upgrades are included separately and not installed, so installation is required before first boot. The 2.5-inch SATA SSDs slot into hot-swap bays while the 64GB DDR5 DIMMs populate the processor memory channels. The server includes redundant hot-swap power supplies and an iLO 6 remote management module for out-of-band access.

1TB DDR5 and 61.44TB SATA capacity

The 1TB memory configuration fills 16 DIMM slots with 64GB modules, leaving no empty slots for further expansion. Eight 7.68TB SATA SSDs deliver 61.44TB of raw storage through the MR408i-o controller. PCIe Gen5 lanes and the OCP 3.0 network adapter provide I/O headroom for additional controllers or accelerators.

Kohokohdat

  • Dual 16-core Xeon 5416s processors handle heavy virtualised workloads
  • 1 TB DDR5-4800 ECC memory supports large-scale databases and analytics
  • 44 TB enterprise SATA SSD array provides high-capacity flash storage
  • Redundant hot-swap power supplies keep the server running during a module failure
  • iLO 6 remote management enables lights-out provisioning and monitoring

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

How can I verify the dual Xeon 5416s processors and 1TB DDR5 memory are recognized after installation?

Enter the BIOS or UEFI on first boot; the system summary will show two Xeon Gold 5416s 16-core CPUs at 2.00 GHz with 30MB cache each and 16 DIMM slots populated with 64GB DDR5-4800 modules for 1TB total.

Which components ship pre-installed and which items must I install from the separate packaging?

The 2U chassis, MR408i-o storage controller, dual redundant power supplies, iLO 6 module, OCP3 4-port 1GbE adapter and rail kit are factory fitted; the 16 memory modules and eight 7.68TB SATA SSDs arrive separately for you to install.

Should I choose the 61.44TB SATA SSD configuration or a different capacity for mixed virtualization and database workloads?

The 61.44TB bundle provides eight 7.68TB enterprise SATA SSDs behind the MR408i-o controller with 4GB cache, delivering high read throughput for VM density and database logging in a single 2U rack server.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.