Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2U rack server with front drive bays and rail kit

HPE

HPE ProLiant DL380 Gen11 2U Rack Server Dual Xeon 6430 32-Core 2.1GHz 512GB 61.44TB

SKU CH-2SZW-Q33YN

2U rack server with dual 32-core Xeon 6430 CPUs, 512GB DDR5 memory and 61.44TB enterprise SATA SSD storage

  • Dual Xeon Gold 6430 CPUs provide 64 cores at 2.1 GHz for heavy workloads
  • 512 GB DDR5-4800 ECC memory supports large virtualisation and database tasks
  • 44 TB enterprise SATA SSD capacity stores massive datasets with RAID protection
  • Redundant hot-swap power supplies keep the server running during a module failure
  • iLO 6 remote management enables full control without physical access

Dual Xeon 6430 Server with 512GB DDR5

The HPE ProLiant DL380 Gen11 is a 2U rack server built around two Xeon Gold 6430 processors, each with 32 cores at 2.10 GHz and 60 MB cache. It ships with 512 GB of DDR5-4800 ECC buffered memory across 16 modules and 61.44 TB of enterprise SATA SSD storage on eight 7.68 TB drives. Redundant power supplies, an OCP3 4-port 1 GbE adapter, MR408i-o storage controller and iLO 6 remote management complete the platform. Memory and drives are supplied separately for on-site installation.

Virtualisation and Database Hosts

This configuration suits organisations running heavily virtualised workloads, large databases or multiple simultaneous applications that benefit from 64 total cores and half a terabyte of memory. The SATA SSD array provides high-capacity read-focused storage with hot-swap convenience. Buyers who need lower core counts, less memory or a smaller storage footprint should evaluate alternative configurations.

SATA III 6 Gb/s Storage Interface

The eight included 2.5-inch SSDs connect through a SATA III 6 Gb/s interface via the MR408i-o controller. This link speed defines the maximum sequential throughput available to the storage array and determines whether the platform meets the I/O demands of the intended workload.

Kohokohdat

  • Dual Xeon Gold 6430 CPUs provide 64 cores at 2.1 GHz for heavy workloads
  • 512 GB DDR5-4800 ECC memory supports large virtualisation and database tasks
  • 44 TB enterprise SATA SSD capacity stores massive datasets with RAID protection
  • Redundant hot-swap power supplies keep the server running during a module failure
  • iLO 6 remote management enables full control without physical access

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

How do I install the 16 DDR5 memory modules and 8 SATA SSDs that arrive outside the chassis?

Open the 2U chassis, populate all 16 DDR5 slots with the 32 GB modules, then insert each 7.68 TB 2.5 inch SATA SSD into the front drive bays; the step most often missed is enabling the MR408i-o controller in UEFI before the OS sees the 61.44 TB array.

Which components will need replacement first during a typical five-year lifecycle?

The dual hot-swap power supplies and the eight enterprise SATA SSDs are the only field-replaceable parts rated for wear; fans and the iLO 6 module are designed for the server’s full service life.

What thermal or power limit appears first when both Xeon 6430 CPUs run at 3.40 GHz turbo continuously?

The redundant power supply capacity sets the ceiling; sustained dual-CPU turbo operation will hit the power budget before the 2U cooling reaches its maximum.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.