Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2U rack server front panel with drive bays and HPE badge

HPE

HPE ProLiant DL380 Gen11 2U rack server Dual Xeon 6430 32-Core 2.1GHz 512GB 7.68TB SAS

SKU CH-2FMY-9KT1M

2U rack server with dual Xeon 6430 32-core CPUs, 512GB DDR5 memory, 7.68TB SAS SSD storage, RAID, redundant power and iLO 6 remote management

  • Dual 32-core Xeon 6430 CPUs deliver high multi-thread throughput for virtualised workloads
  • 512 GB DDR5-4800 ECC memory supports large datasets with error correction
  • 68 TB enterprise SAS SSDs provide fast, reliable storage for critical applications
  • Redundant hot-swap power supplies keep the server running during a module failure
  • iLO 6 remote management enables secure out-of-band control and provisioning

Dual 32-core Xeon 6430 server with 512GB DDR5

The HPE ProLiant DL380 Gen11 2U rack system ships with two Xeon Gold 6430 processors, each running 32 cores at 2.1 GHz with 60 MB cache and 3.4 GHz turbo. Eight 64 GB DDR5-4800 ECC buffered modules provide 512 GB of memory bandwidth for virtualized workloads.

7.68 TB enterprise SAS SSD storage

Four 1.92 TB 2.5-inch SAS 12 Gb/s SSDs deliver high-speed capacity managed by an MR408i-o Gen11 storage controller with 4 GB cache. Embedded 4-port 1 GbE OCP3 networking and iLO 6 remote management come standard. Redundant hot-swap power supplies keep the platform running during maintenance.

Assembly required for memory and drives

Hard drives and memory upgrades are packaged separately and must be installed before deployment. Buyers without rack-mount infrastructure or internal installation resources should plan for professional integration. This configuration does not suit environments that need pre-validated, ready-to-run appliances.

Dual-socket density with DDR5 bandwidth decides fit

The combination of 64 total cores and 512 GB of DDR5-4800 memory is the specification that determines whether this server matches the workload. If the application scales across that thread count and memory throughput, the platform fits; otherwise a smaller or differently balanced system is appropriate.

Kohokohdat

  • Dual 32-core Xeon 6430 CPUs deliver high multi-thread throughput for virtualised workloads
  • 512 GB DDR5-4800 ECC memory supports large datasets with error correction
  • 68 TB enterprise SAS SSDs provide fast, reliable storage for critical applications
  • Redundant hot-swap power supplies keep the server running during a module failure
  • iLO 6 remote management enables secure out-of-band control and provisioning

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

What rack-mount hardware is included for the 2U chassis?

An HPE rail kit is included with the server for mounting in a standard rack.

What installation steps are required because components ship separately?

The 8 memory modules and 4 SSD drives must be physically installed into their respective slots and drive bays before first boot.

Which hot-swap components can be replaced later without downtime?

The redundant power supplies and the 2.5-inch SAS SSDs are hot-swappable for non-disruptive replacement.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.