Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver 2U rack server, eight front drive bays, no drives installed

HPE

HPE ProLiant DL380 Gen9 8SFF rack server 2× Xeon E5-2603 v3 1.6GHz 384GB DDR4 no drives

SKU CH-SZFP-6EC4A

Rack server with two 1.6 GHz Xeon E5-2603 v3 CPUs and 384 GB DDR4 memory in an 8-bay 2.5-inch chassis

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed1.6GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size384GB
  • Dual Xeon E5-2603 v3 processors at 1.6GHz for multi-threaded workloads
  • 384GB DDR4 ECC registered memory supports large datasets
  • HPE Smart Array P440 SAS controller enables RAID flexibility
  • iLO Advanced remote management provides out-of-band control
  • 8 SFF bays with SATA support for configurable storage density

Eight-bay rack server with dual Xeon processors

The HPE ProLiant DL380 Gen9 8SFF is a 2U rack-mount server fitted with two Intel Xeon E5-2603 v3 processors running at 1.6 GHz and 384 GB of DDR4 ECC registered memory. It ships without drives and includes an HPE Smart Array P440 SAS controller, dual 500 W Flex Slot power supplies, iLO Advanced remote management, and an Intel I350/X540 quad-port network card delivering two 10 GbE and two 1 GbE links.

Suits workloads that need high memory capacity

Buyers who want more storage than eight 2.5-inch bays provide or who require a different drive interface than SATA or SAS should look at other platforms. Organisations that need GPU acceleration or a single-socket design will not match this dual-processor configuration. The server targets virtualisation, database, and general-purpose compute tasks where memory density and out-of-band management are priorities.

Memory capacity of 384 GB DDR4 decides fit

The installed 384 GB of DDR4 ECC registered memory sets the immediate working set size and determines whether the system can handle the intended consolidation ratio. The chassis supports up to 3 TB, so the configuration can grow, but the starting point is fixed at 384 GB and uses DDR4 modules only.

Kohokohdat

  • Dual Xeon E5-2603 v3 processors at 1.6GHz for multi-threaded workloads
  • 384GB DDR4 ECC registered memory supports large datasets
  • HPE Smart Array P440 SAS controller enables RAID flexibility
  • iLO Advanced remote management provides out-of-band control
  • 8 SFF bays with SATA support for configurable storage density

Tekniset tiedot

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed1.6GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)4,00
Storage ControllerHPE Smart Array P440 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Kysymyksiä tästä tuotteesta

Do I need to provide my own 2.5-inch SATA or SAS drives for the eight front bays?

Yes, the 8SFF chassis has eight 2.5-inch bays and no drives are installed; you must add compatible SATA or SAS drives.

Will my existing PCIe 3.0 expansion cards work with the two Xeon E5-2603 v3 CPUs?

The E5-2603 v3 processors provide PCIe 3.0 lanes, so PCIe 3.0 cards will operate at their native speed.

How can I confirm the 384 GB DDR4 ECC memory is recognised and healthy after power-on?

During POST the iLO console reports total memory and runs a memory test; a clean POST with 384 GB shown confirms correct operation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.