Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Compact tower server in matte silver finish with front drive bays and padlock eye

HPE

HPE ProLiant MicroServer Gen10 Plus v2 Tower Server Xeon E-2314 2.8GHz 32GB 16TB SSD

SKU CH-TWQ2-4W0K8

A compact tower server with a Xeon E-2314 processor, 32GB DDR4 memory and 16TB of SATA SSD storage for small-business workloads

  • Xeon E-2314 4-core 2.8 GHz up to 4.5 GHz turbo for responsive compute
  • 32 GB DDR4 3200 MHz memory handles multi-tasking workloads
  • 16 TB SATA SSD storage delivers ultra-fast data access
  • Smart Array VROC RAID protects data across four drives
  • HPE iLO remote management enables headless server control

MicroServer Gen10 Plus v2 tower server

The HPE ProLiant MicroServer Gen10 Plus v2 is a compact tower server built around a Xeon E-2314 four-core processor running at 2.8 GHz with a 4.5 GHz turbo frequency. It ships with 32 GB of DDR4 memory and 16 TB of SATA SSD storage arranged as four 4 TB drives. The system includes HPE iLO remote management and an embedded four-port 1 Gb network controller.

Small businesses needing on-premise compute

This server suits small offices that want local file sharing, backup or light virtualisation with integrated RAID and remote management. Organisations requiring redundant power supplies, 10 Gb networking or GPU acceleration should evaluate larger platforms. Buyers who need hot-swap drive bays or rackmount form factors will also need a different chassis.

Bundled drives and memory require installation

The four 4 TB SATA SSDs and the two 16 GB DDR4 modules are supplied separately and must be installed before use. This approach lets administrators verify hardware compatibility and configure the Smart Array VROC RAID layout to match their redundancy requirements. The single power supply and physical security features such as the Kensington slot and padlock eye remain standard regardless of the installation sequence.

Kohokohdat

  • Xeon E-2314 4-core 2.8 GHz up to 4.5 GHz turbo for responsive compute
  • 32 GB DDR4 3200 MHz memory handles multi-tasking workloads
  • 16 TB SATA SSD storage delivers ultra-fast data access
  • Smart Array VROC RAID protects data across four drives
  • HPE iLO remote management enables headless server control

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

Do I need a display, keyboard and mouse to complete the initial setup of the Xeon E-2314 server?

The system includes HPE Integrated Lights-Out remote management so you can perform the initial configuration over the network without a local display, keyboard or mouse.

Can the four 4 TB SATA SSDs share the existing Smart Array VROC controller with older SATA hard drives I want to keep?

The Smart Array VROC controller supports SATA III 6 Gb/s devices, so legacy SATA drives can coexist with the new SSDs on the same controller.

How can I verify the 32 GB DDR4 3200 MHz memory is running at the correct speed after I install the two 16 GB modules?

Check the POST screen or the iLO interface; both will report the memory operating at 3200 MHz once the modules are seated and the system boots.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.