Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Compact white tower server with front drive bays and padlock loop

HPE

HPE ProLiant MicroServer Gen10 Plus v2 Tower Server Xeon E-2314 2.8GHz 32GB 4TB SSD

SKU CH-NSKB-0AA5T

Compact tower server with Xeon E-2314 processor, 32GB DDR4 memory and 4TB SATA SSD storage

  • Xeon E-2314 4-core 2.8 GHz up to 4.5 GHz turbo for responsive compute
  • 32 GB DDR4 3200 MHz in two 16 GB modules for smooth multitasking
  • 4 TB SATA SSD storage across four 1 TB drives for fast data access
  • Embedded 1 Gb four-port network controller for flexible connectivity
  • HPE iLO remote management for secure out-of-band server control

Compact Xeon server for small businesses

The HPE ProLiant MicroServer Gen10 Plus v2 is a tower system built around a Xeon E-2314 four-core processor running at 2.8 GHz with a 4.5 GHz turbo. It ships with 32 GB of DDR4 memory and 4 TB of SATA SSD storage across four 1 TB drives. This configuration targets small offices needing integrated remote management and physical security features in a quiet form factor.

Installation requires fitting memory and drives

The 32 GB DDR4 kit and the four SATA SSDs are supplied separately and must be installed before first use. Builders should verify the unbuffered DDR4 modules seat fully in the UDIMM slots and that each 2.5-inch drive connects to the Smart Array VROC controller. The single power supply and internal USB 3.2 Gen 1 port leave no redundancy for power or internal boot media.

SATA interface caps throughput at 6 Gb/s

The four 1 TB SSDs operate on a SATA III 6 Gb/s bus, limiting sequential transfer rates to the interface maximum regardless of drive capability. The embedded 1 Gb four-port controller restricts network throughput to gigabit speeds. Buyers who need more storage bandwidth or multi-gigabit networking must add expansion cards, which the compact chassis may not accommodate.

Kohokohdat

  • Xeon E-2314 4-core 2.8 GHz up to 4.5 GHz turbo for responsive compute
  • 32 GB DDR4 3200 MHz in two 16 GB modules for smooth multitasking
  • 4 TB SATA SSD storage across four 1 TB drives for fast data access
  • Embedded 1 Gb four-port network controller for flexible connectivity
  • HPE iLO remote management for secure out-of-band server control

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

How do I verify the Xeon E-2314 is running at 2.8GHz with Turbo up to 4.5GHz after setup?

Open the iLO remote-management interface or enter the UEFI/BIOS during boot; both report the live CPU frequency so you can confirm base and Turbo speeds.

Which drives and memory modules must I install myself from the included parts?

The four 1TB SATA SSDs and the two 16GB DDR4-3200 sticks ship loose; mount the SSDs in the drive bays and seat the DIMMs in the motherboard slots before first power-on.

Should I choose the 32GB (2 x 16GB) DDR4-3200 kit or a different capacity for this Xeon E-2314?

The server arrives with 32GB as a matched pair of 16GB DDR4-3200 modules; add another identical kit only if your workload later demands more than 32GB.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.