Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Compact white tower server with front drive bays and padlock eye

HPE

HPE ProLiant MicroServer Gen10 Plus v2 Xeon E-2314 2.8GHz 64GB 4TB SATA SSD Tower Server

SKU CH-H8Y6-0BRM8

Compact tower server with a Xeon E-2314 2.8 GHz CPU, 64 GB DDR4 memory and 4 TB SATA SSD storage

  • 4-core Xeon E-2314 up to 4.5GHz turbo for responsive compute
  • 64GB DDR4 3200MHz unbuffered memory handles multi-tasking workloads
  • 4TB across four 1TB SATA SSDs delivers ultra-fast storage capacity
  • Embedded quad-port 1Gb i350 network controller connects multiple LAN segments
  • HPE iLO remote management plus UEFI Secure Boot and firmware rollback security

Small-business tower server

The HPE ProLiant MicroServer Gen10 Plus v2 is a compact tower server built around a Xeon E-2314 four-core processor running at 2.8GHz with a 4.5GHz turbo frequency. It arrives with 64GB of DDR4 3200MHz unbuffered memory installed as two 32GB modules. Four 1TB SATA SSDs provide 4TB of total storage capacity connected to a Smart Array VROC controller. An embedded four-port 1Gb i350-AM4 network controller handles wired connectivity.

Suits on-premise file and application hosting

This server fits small businesses that need a quiet, physical tower for local file sharing, backup or lightweight virtualisation. The single power supply and unbuffered memory limit redundancy, so organisations requiring high-availability clustering or error-correcting memory should evaluate other platforms. Buyers who want rack-mount form factors or hot-swap drive bays will also need a different chassis design.

Drives and memory ship separately

The four SATA SSDs and the two memory modules are packaged apart from the chassis and must be installed before first use. This allows the buyer to verify each component and to populate the drive bays in a preferred RAID layout using the VROC controller. An internal USB 3.2 Gen 1 Type-A port remains available for a licence key or boot media after the main storage is configured.

Kohokohdat

  • 4-core Xeon E-2314 up to 4.5GHz turbo for responsive compute
  • 64GB DDR4 3200MHz unbuffered memory handles multi-tasking workloads
  • 4TB across four 1TB SATA SSDs delivers ultra-fast storage capacity
  • Embedded quad-port 1Gb i350 network controller connects multiple LAN segments
  • HPE iLO remote management plus UEFI Secure Boot and firmware rollback security

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

What operating system licence do I need to run the Xeon E-2314 and 64GB DDR4 on this MicroServer Gen10 Plus v2?

The server ships without an OS; you must supply a compatible Windows Server, Linux distribution or hypervisor licence that supports the Xeon E-2314 4-core CPU and the 64GB DDR4 PC4-25600 memory.

Can I keep my older SATA III 3Gb/s hard drives in the four drive bays alongside the 1TB SATA III 6Gb/s SSDs?

Yes, the bays accept any 2.5-inch SATA III drive; older 3Gb/s disks will operate at their rated speed while the four 1TB SSDs run at 6Gb/s.

How do I verify the Smart Array VROC RAID and iLO remote management are active after installing the memory and SSDs?

During POST the VROC option ROM reports the RAID volumes, and the iLO network port displays its IP address; both can be confirmed in the UEFI System Utilities and the iLO web interface.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.