Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
HPE ProLiant ML30 Gen10 Plus tower server in silver chassis with front drive bays

HPE

HPE ProLiant ML30 Gen10 Plus Tower Server Xeon E-2314 64GB 16TB

SKU CH-E9P5-GFP0Y

Tower server with Xeon E-2314 processor, 64GB DDR4 memory and 16TB SATA storage, plus iLO remote management

  • Xeon E-2314 4-core 2.8GHz turbo 4.5GHz powers demanding workloads
  • 64GB DDR4 3200MHz memory handles multiple applications simultaneously
  • 16TB across 4 SATA drives provides extensive storage capacity
  • iLO dedicated port enables remote server management anywhere
  • 4 PCIe slots plus M.2 allow future expansion flexibility

Small-business tower server

The HPE ProLiant ML30 Gen10 Plus is a tower server built for small businesses and remote offices that need on-premise compute and storage. It ships with a Xeon E-2314 four-core processor running at 2.8 GHz with turbo up to 4.5 GHz. The system includes 64 GB of DDR4 memory and 16 TB of SATA hard-drive capacity. Assembly of the memory and drives is required before use.

Upgrade from entry-level or desktop hardware

This server replaces basic desktop-as-a-server setups or older single-socket towers that lack ECC memory and hardware RAID. The jump is worth it when workloads demand data integrity through unbuffered DDR4 and the Smart Array VROC controller. It also adds dedicated remote management through iLO with its own network port. Buyers who need redundant power supplies or higher core counts should look elsewhere.

64 GB memory and 16 TB storage headroom

The 64 GB DDR4-3200 configuration handles typical file, print, and light virtualization workloads with room for additional virtual machines. Four 4 TB SATA drives provide 16 TB of raw capacity for backups and shared files. Memory and drive bays can be expanded further using the four PCIe slots and the M.2 slot. Workloads requiring all-flash performance or larger memory footprints will exceed the included hardware.

Kohokohdat

  • Xeon E-2314 4-core 2.8GHz turbo 4.5GHz powers demanding workloads
  • 64GB DDR4 3200MHz memory handles multiple applications simultaneously
  • 16TB across 4 SATA drives provides extensive storage capacity
  • iLO dedicated port enables remote server management anywhere
  • 4 PCIe slots plus M.2 allow future expansion flexibility

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

How many 3.5-inch drive bays are needed for the 16TB storage?

Four 3.5-inch bays are required to hold the four 4TB SATA III hard drives included with the server.

What is the correct order for installing the 64GB memory kit?

Insert the four 16GB DDR4 3200MHz unbuffered DIMMs into the motherboard slots following the population sequence shown in the HPE service guide.

When should the 4TB SATA III hard drives be replaced?

Replace drives when SMART monitoring via iLO or the Smart Array VROC controller reports reallocated sectors or predictive failure alerts.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.