Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
HPE ProLiant ML350 Gen10 4LFF rack server silver front panel

HPE

HPE ProLiant ML350 Gen10 4LFF rack server 2x Xeon Silver 4210 256GB DDR4

SKU CH-PGBS-VMA27

Dual 2.2 GHz 10-core Xeon Silver 4210 processors, 256 GB DDR4 ECC memory, Smart Array P408 SAS controller and four 3.5-inch drive bays in a rack-mount chassis

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.2GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size256GB
  • Dual 10-core Xeon Silver 4210 CPUs at 2.2GHz deliver high multi-thread throughput
  • 256GB DDR4 ECC registered memory supports large virtualisation workloads
  • HPE Smart Array P408 SAS controller manages up to four 3.5" SATA drives
  • Integrated Intel I350/X540 network card provides two 10GbE and two 1GbE ports
  • Dual 500W Flex Slot power supplies with iLO Advanced remote management ensure uptime

Dual Xeon Silver 4210 server

The HPE ProLiant ML350 Gen10 is a rack-mount server system equipped with two Intel Xeon Silver 4210 processors running at 2.2 GHz. It ships with 256 GB of DDR4 ECC registered memory and a Smart Array P408 SAS controller. The 4 LFF chassis supports up to four 3.5-inch SATA drives. This configuration targets organisations that need a tested, firmware-updated platform for virtualization, database or file-serving workloads.

Installation and common issues

The unit arrives with BIOS and firmware already updated to the latest stable version and has passed full diagnostics and burn-in testing. Mount the server in a standard rack using the optional rail kit, then populate the four 3.5-inch bays with SATA drives before configuring RAID on the P408 controller. A frequent oversight is forgetting that no drives are included, so the array cannot be created until storage is added. The integrated iLO Advanced remote management module should be licensed and networked first to simplify later administration.

Pre-order checklist

Verify that your rack provides at least 36 inches of depth, 24 inches of width and 10 inches of height to accommodate the chassis dimensions. Confirm the facility can supply two 500 W Flex Slot power supplies with the correct inlet connectors. Ensure the operating system or hypervisor you plan to deploy supports the installed Xeon Silver 4210 CPUs and 256 GB DDR4 memory capacity. Finally, check that your network infrastructure can utilise the dual 10 GbE and dual 1 GbE ports provided by the installed Intel I350/X540 adapter.

Kohokohdat

  • Dual 10-core Xeon Silver 4210 CPUs at 2.2GHz deliver high multi-thread throughput
  • 256GB DDR4 ECC registered memory supports large virtualisation workloads
  • HPE Smart Array P408 SAS controller manages up to four 3.5" SATA drives
  • Integrated Intel I350/X540 network card provides two 10GbE and two 1GbE ports
  • Dual 500W Flex Slot power supplies with iLO Advanced remote management ensure uptime

Tekniset tiedot

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.2GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size256GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)2,00
Storage ControllerHPE Smart Array P408 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Kysymyksiä tästä tuotteesta

How do I verify both Xeon Silver 4210 CPUs are recognised after powering on the ML350 Gen10?

During POST the system BIOS lists each processor by model and core count, and the iLO 5 web interface shows two sockets populated with 10-core 2.2 GHz CPUs.

What ships inside the ML350 Gen10 4LFF box and what must I order separately?

The chassis includes 2× Xeon Silver 4210 processors, 256 GB DDR4 ECC RDIMMs, Smart Array P408 controller, 2× 500 W Flex Slot PSUs, Intel I350/X540 2× 10 GbE + 2× 1 GbE NIC, and rail kit on request; 3.5″ drives are not included.

Should I choose the 256 GB DDR4 configuration or add more memory up to the 3 TB limit?

Start with the installed 256 GB DDR4 ECC Registered if your current workloads fit; add DDR4 RDIMM kits later to scale toward the 3 TB maximum supported by the dual 4210 CPUs.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.