Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver rack-mount server chassis with eight front drive bays

HPE

HPE ProLiant ML350 Gen10 8SFF rack server 1x Xeon Silver 4210 256GB DDR4 no drive

SKU CH-TYW7-9TKDH

Rack-mount server with a 10-core Xeon Silver 4210 at 2.2 GHz, 256 GB DDR4 ECC memory, Smart Array P408 SAS controller and eight 2.5-inch drive bays

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.2GHz
  • # of Processors Installed1
  • MAX Processors2
  • Installed Memory Size256GB
  • 10-core Xeon Silver 4210 at 2.2GHz
  • 256GB DDR4 ECC registered memory
  • Smart Array P408 SAS controller included
  • Dual 500W Flex Slot power supplies
  • 8 SFF drive bays for 2.5" SATA drives

ProLiant ML350 Gen10 8SFF rack server

The HPE ProLiant ML350 Gen10 is a 2U rack server configured with an 8-bay 2.5-inch SFF chassis. It ships with one Intel Xeon Silver 4210 processor running at 2.2 GHz with 10 cores and 256 GB of DDR4 ECC registered memory. A Smart Array P408 SAS controller manages storage connectivity, while dual 500 W flex-slot power supplies provide redundancy. Integrated Intel I350 and X540 network adapters deliver two 10 GbE and two 1 GbE ports, and HPE iLO Advanced handles remote management.

Suitable uses and limits

This configuration suits organisations that need a validated, firmware-updated platform for virtualisation, database or file-serving workloads where memory capacity and redundant power are priorities. The 8 SFF bays accept SATA or SAS drives so buyers can choose capacity and performance tiers. Buyers who need GPU compute, more than two processors, or storage interfaces beyond SAS and SATA should evaluate alternative platforms.

Deciding specification

The single specification that determines fit is the 256 GB DDR4 ECC registered memory installed across the available DIMM slots. This capacity supports moderate to large virtual machine densities and in-memory databases immediately, while the platform maximum of 3 TB allows future expansion if workloads grow.

Kohokohdat

  • 10-core Xeon Silver 4210 at 2.2GHz
  • 256GB DDR4 ECC registered memory
  • Smart Array P408 SAS controller included
  • Dual 500W Flex Slot power supplies
  • 8 SFF drive bays for 2.5" SATA drives

Tekniset tiedot

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.2GHz
# of Processors Installed1
MAX Processors2
Installed Memory Size256GB
Memory TypeDDR4
Max Memory Capacity3TB
Hard Drive (Installed)3,84
Storage ControllerHPE Smart Array P408 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Kysymyksiä tästä tuotteesta

Will the Smart Array P408 controller recognise the 2.5-inch SATA drives I already own?

The P408 SAS controller supports SATA drives in the 2.5-inch bays so your existing drives will be recognised.

Can the single Xeon Silver 4210 at 2.2GHz run workloads that previously ran on an older Xeon in the same chassis?

The 10-core 4210 provides a newer architecture and higher core count than earlier Silver parts, so legacy workloads will run on the single installed processor.

How do I confirm the 256GB DDR4 ECC memory is operating correctly after power-on?

Watch the iLO console during POST — it reports total memory detected and flags any DIMM errors before the OS loads.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.