Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
HPE ProLiant ML350 Gen10 4U tower server, silver metal chassis, front drive bays visible

HPE

HPE ProLiant ML350 Gen10 Tower Server Dual Xeon 6148 2.40 GHz 256GB 7.68TB SATA SSD

SKU CH-PDB0-K6V0R

Tower server with dual 20-core Xeon Gold 6148 CPUs at 2.40 GHz, 256 GB DDR4-3200 memory, 7.68 TB enterprise SATA SSD storage, redundant power and iLO 5 remote management

  • TypeTower
  • Dual 20-core Xeon 6148 CPUs deliver 40 threads at 2.40 GHz
  • 256 GB DDR4 3200 MHz memory supports large virtualisation workloads
  • 68 TB enterprise SATA SSD storage provides fast, reliable capacity
  • Redundant power supplies keep the server running during a module failure
  • Embedded 4-port 1GbE and iLO 5 simplify remote management

HPE ProLiant ML350 Gen10 Tower Server

The HPE ProLiant ML350 Gen10 is a 4U tower server configured for small business or enterprise workloads. It ships with dual Xeon Gold 6148 20-core processors running at 2.40 GHz with turbo up to 3.70 GHz. The system includes 256GB of DDR4 memory across eight 32GB modules and 7.68TB of storage via four 1.92TB enterprise SATA SSDs. Memory and drives are supplied separately and require installation.

Redundant power and embedded 4-port 1GbE networking

Dual hot-swappable power supplies allow replacement without taking the server offline, keeping critical applications running. The embedded 369i adapter provides four 1GbE ports for network connectivity. A P408i-a storage controller with 2GB cache and Smart Storage Battery manages the RAID array. Remote management is handled through integrated iLO 5.

Included components require assembly before use

The 256GB DDR4 memory kit and four 1.92TB SATA SSDs are packaged separately and must be installed in the chassis. The P408i-a controller with battery-backed cache enables RAID configuration for the SSD array once drives are fitted. iLO 5 provides out-of-band management access immediately after power and network are connected.

Kohokohdat

  • Dual 20-core Xeon 6148 CPUs deliver 40 threads at 2.40 GHz
  • 256 GB DDR4 3200 MHz memory supports large virtualisation workloads
  • 68 TB enterprise SATA SSD storage provides fast, reliable capacity
  • Redundant power supplies keep the server running during a module failure
  • Embedded 4-port 1GbE and iLO 5 simplify remote management

Tekniset tiedot

TypeTower

Kysymyksiä tästä tuotteesta

How do I install the eight 32 GB DDR4 modules and four 1.92 TB SATA SSDs that ship separately?

Power down the tower, open the chassis, seat each 32 GB DIMM into the correct DDR4 slots following the population guide, then mount the four 2.5-inch SSDs into the hot-swap drive bays and connect them to the P408i-a/2GB controller.

Which components will need replacement after extended operation?

The Smart Storage Battery on the P408i-a/2GB controller and the dual redundant power supplies are the primary field-replaceable units that degrade over time.

What thermal or power limit appears first when both Xeon Gold 6148 CPUs run at 3.70 GHz turbo continuously?

The 4U tower’s cooling capacity and the dual redundant power supply rating set the practical ceiling before the processors can sustain maximum turbo across all 20 cores each.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.