Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular silver plug-in power supply module with C20 inlet adapter

HPE

HPE R0X36A#B2E 6400 3000W power supply

SKU CH-JTX4-74M2D MPN R0X36A#B2E

A plug-in redundant power supply delivering 3000 W at 54 V DC for the HPE 6400, accepting 120 V or 230 V AC via a C20 inlet adapter

  • TypeRedundant Power Supply
  • 3000 W output powers dense HPE 6400 chassis
  • 120 V and 230 V AC input supports global deployments
  • Plug-in module design enables hot-swap replacement
  • 54 V DC delivery matches system rail requirements
  • C20 inlet adapter included for secure rack connection

HPE 6400 3000W redundant power module

The HPE 6400 power supply is a plug-in redundant module rated at 3000W with a 54 V DC output. It accepts 120 V AC or 230 V AC input through a C20 inlet adapter. This unit is designed for installation in compatible HPE server and storage chassis that support hot-plug power redundancy.

Suited for HPE chassis requiring 3000W hot-plug

This module fits administrators maintaining HPE infrastructure where a 3000W redundant power supply is specified. It is not suitable for builds needing a different wattage, form factor, or non-redundant standalone power supply. Buyers without a compatible HPE chassis slot should look at other power solutions.

3000W output at 54 V DC with C20 inlet

The defining specification is the 3000W capacity delivered at 54 V DC via a plug-in module with C20 inlet. Confirm the target chassis accepts this exact power rating, voltage, and physical interface before purchase.

Kohokohdat

  • 3000 W output powers dense HPE 6400 chassis
  • 120 V and 230 V AC input supports global deployments
  • Plug-in module design enables hot-swap replacement
  • 54 V DC delivery matches system rail requirements
  • C20 inlet adapter included for secure rack connection

Tekniset tiedot

BrandHP
TypeRedundant Power Supply
Lähetyspaino3.72 kg
Pakkauksen mitat533 × 229 × 203 mm

Kysymyksiä tästä tuotteesta

How much heat does the 6400 3000W module dump into the rack when it runs continuously at 3000 W?

The unit draws up to 3000 W from the mains and delivers 54 V DC; all of that energy becomes heat inside the enclosure, so plan airflow for the full 3000 W load.

What chassis and inlet wiring must already be in place for this plug-in module to operate?

It requires an HPE 6400-series chassis with a compatible power-supply bay and a C20 inlet fed by a 120 V or 230 V AC circuit rated for the module’s draw.

Will this supply work with the MSA 1060 storage array I already own?

The listed compatibility is HPE MSA 1060 Storage Array, so the module is designed to power that platform when installed in a supported 6400 chassis.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.