Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
White mid-tower case with tempered glass side panel and micro-mesh front

HYTE

HYTE CS-HYTE-X50G-WW ATX Mid-Tower PC Case White

SKU CH-VZG2-VA5YQ MPN CS-HYTE-X50G-WW

White mid-tower case with louvered blade ventilation, cold-floor GPU cooling, acoustic laminated glass and support for ATX, E-ATX, ITX and Micro-ATX boards

  • TypeATX Mid Tower
  • ColorWhite
  • Case MaterialABS / Steel / Tempered Glass
  • Motherboard CompatibilityATX / E-ATX / ITX / Micro ATX
  • Dust FiltersBottom
  • Internal 3.5" Drive Bays1

Option Glass (Snow White)

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • Full-coverage micro-mesh intake lowers airflow resistance for quieter cooling
  • Patent-pending louvered blades slice exhaust air while stiffening the chassis
  • 4 mm laminated acoustic glass dampens sound and resists shattering
  • Cold-floor design directs up to three 120 mm fans straight at the GPU
  • Top-mounted PSU shroud lets cables hang with gravity for cleaner routing

ATX Mid-Tower with Full-Coverage Micro-Mesh

The HYTE X50 is an ATX mid-tower chassis built around a full-coverage micro-mesh front panel that creates a low-pressure, low-resistance intake path. It supports ATX, E-ATX, Micro-ATX and ITX motherboards, giving builders a wide choice of board sizes. The white finish combines ABS, steel and laminated acoustic glass for a clean, modern look.

Louvered Blade Ventilation

Patent-pending louvered blade ventilation slices through exhaust air with angled metal instead of traditional punch-outs, reducing impedance while stiffening the frame. A top-mounted PSU shroud enables cold-floor cooling, directing fresh intake from up to three 120 mm side fans straight to the graphics card. CPU cooler clearance reaches 170 mm, and the case accepts a 360 mm front radiator for liquid loops.

4 mm Laminated Acoustic Glass

The 4 mm thick laminated acoustic glass dampens system noise and uses a shatter-resistant bonding layer that holds the panel together if impacted. With the PSU shroud at the top, cables hang downward and follow gravity, simplifying routing and keeping the interior tidy. Internal bays include one 3.5" slot and two 2.5" slots, while seven expansion slots handle full-length cards.

Kohokohdat

  • Full-coverage micro-mesh intake lowers airflow resistance for quieter cooling
  • Patent-pending louvered blades slice exhaust air while stiffening the chassis
  • 4 mm laminated acoustic glass dampens sound and resists shattering
  • Cold-floor design directs up to three 120 mm fans straight at the GPU
  • Top-mounted PSU shroud lets cables hang with gravity for cleaner routing

Tekniset tiedot

BrandHYTE
ModelCS-HYTE-X50G-WW
TypeATX Mid Tower
ColorWhite
Case MaterialABS / Steel / Tempered Glass
Motherboard CompatibilityATX / E-ATX / ITX / Micro ATX
Dust FiltersBottom
Internal 3.5" Drive Bays1
Internal 2.5" Drive Bays2
Expansion Slots7
Fan OptionsFront - 3 x 120mm / Rear - 1 x 120mm / Side - 3 x 120mm
Max CPU Cooler Height170 mm
Lähetyspaino13.54 kg
Pakkauksen mitat605 × 584 × 343 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will an existing ATX motherboard and a 170 mm tower cooler fit inside the X50?

The case supports ATX, E-ATX, ITX and Micro-ATX boards and allows a maximum CPU cooler height of 170 mm.

How can I verify the louvered blade ventilation is reducing exhaust impedance as intended after setup?

Check that rear and side exhaust airflow feels strong and that GPU temperatures remain low under load; the louvered design slices through hot air while reinforcing chassis rigidity.

What comes in the box and which cooling components must be bought separately?

The chassis includes one internal 3.5" bay, two 2.5" bays, seven expansion slots and a bottom dust filter; fans for the front, rear and side mounts are not included.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.