Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Orange mid-tower case with micro-mesh front panel, louvered top vents and tempered glass side

HYTE

HYTE X50 Astral Orange ATX Mid Tower PC case

SKU CH-9TXA-CBCWX

An ATX mid-tower case with micro-mesh intake, louvered exhaust blades and top-mounted PSU shroud directing 360mm of airflow to the GPU

  • TypeATX Mid Tower
  • ColorOrange
  • Case MaterialABS / Steel / Tempered Glass
  • With Power SupplyNo
  • Power Supply MountedATX up to 223mm in length
  • Motherboard CompatibilityMicro ATX / ATX / E-ATX

Option Glass (Astral Orange)

  • Air (Black)
  • Air (Snow White)
  • Glass (Black)
  • Glass (Green)
  • Glass (Pink)
  • Glass (Purple)
  • Glass (Red)
  • Glass (Snow White)
  • Glass (Astral Orange)

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

  • Full-coverage micro-mesh intake lowers pressure drop for quieter cooling
  • Patent-pending louvered blades slice exhaust flow while stiffening the frame
  • 4 mm laminated acoustic glass dampens sound and holds shards if broken
  • Top-mounted PSU shroud routes cables downward with gravity for cleaner builds
  • 360 mm of direct GPU intake air keeps graphics temperatures lower

Modern airflow chassis

The HYTE X50 Astral Orange is an ATX mid-tower case built for builders who want lower GPU temperatures through a top-mounted PSU shroud that directs up to 360mm of fresh intake air straight to the graphics card. Its full-coverage micro-mesh front and patent-pending louvered blade ventilation create a low-pressure, low-resistance air path that suits high-wattage components. The case supports Micro-ATX, ATX and E-ATX motherboards and fits ATX power supplies up to 223mm in length.

Thermals noise and power draw

Three pre-installed 120mm fans and three 140mm fans move air through the micro-mesh intake and louvered exhaust blades, reducing exhaust impedance while reinforcing chassis rigidity. The 4mm thick laminated acoustic glass panels add a shatter-resistant bonding layer and dampen transmission of fan and coil noise during typical desktop and gaming loads. Front I/O includes two USB 3.2 Gen 1 Type-A ports, one USB 3.2 Gen 2x2 Type-C port and a combo audio jack for convenient peripheral access.

Sustained load behaviour

Under prolonged workloads the top-mounted PSU layout keeps cable runs vertical and gravity-assisted, preventing clutter from blocking the direct GPU airflow channel. The micro-mesh and louvered blade combination maintains consistent intake and exhaust pressure differentials so temperatures stabilise without fan curves ramping aggressively. Builders who need more than three 120mm and three 140mm fan positions or who require a built-in power supply should consider other chassis designs.

Kohokohdat

  • Full-coverage micro-mesh intake lowers pressure drop for quieter cooling
  • Patent-pending louvered blades slice exhaust flow while stiffening the frame
  • 4 mm laminated acoustic glass dampens sound and holds shards if broken
  • Top-mounted PSU shroud routes cables downward with gravity for cleaner builds
  • 360 mm of direct GPU intake air keeps graphics temperatures lower

Tekniset tiedot

BrandHYTE
SeriesX50
TypeATX Mid Tower
ColorOrange
Case MaterialABS / Steel / Tempered Glass
With Power SupplyNo
Power Supply MountedATX up to 223mm in length
Motherboard CompatibilityMicro ATX / ATX / E-ATX
Front Ports2 x Front USB 3.2 Gen 1x1 Type A
1 x Front USB 3.2 Gen 2x2 Type C
Combo Audio Jack
120mm Fans3
140mm Fans3

Kysymyksiä tästä tuotteesta

How do I mount the power supply in the top shroud of the HYTE X50 Astral Orange, and which orientation mistake should I avoid?

Install the ATX unit up to 223mm long with its fan facing the louvered blade exhaust; the common error is flipping it so the fan pulls air from the motherboard chamber instead of venting directly out the top.

What upkeep do the micro-mesh panels and acoustic glass need over time?

Vacuum or rinse the full-coverage micro-mesh intake whenever dust builds up, and wipe the 4mm laminated glass with a soft cloth; the shatter-proof layer requires no special treatment beyond normal cleaning.

Which thermal limit appears first when the GPU runs a long, heavy load?

The graphics card sees up to 360mm of direct front intake air, so the first bottleneck is usually the GPU's own boost algorithm rather than case airflow restriction.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.