IBM
IBM 46W0670 16GB DDR3 1866 ECC Registered Server RAM
16 GB DDR3 1866 ECC registered server memory module with CL13 latency and 1.50 V operation
- Capacity16GB
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1866 (PC3 14900)
- CAS LatencyCL13
- Voltage1.50V
- ECCYes
- 16 GB capacity supports large server workloads
- DDR3 1866 speed delivers PC3 14900 bandwidth
- ECC registered design protects data integrity
- CL13 latency at 1.50 V for stable timing
- 240 pin 2Rx4 module fits compatible System X servers
Server memory for System x
This 16 GB DDR3 module runs at 1866 MT/s with CL13 latency and 1.50 V operation. ECC and registered buffering provide the error correction and signal integrity required by IBM System x servers. The 2Rx4 organisation fits two ranks across four-bit wide chips.
Upgrade path for registered ECC slots
The part suits administrators expanding or repairing System x platforms that accept 240-pin DDR3 registered DIMMs. Workstations or consumer boards limited to unbuffered memory cannot use this module. Buyers needing higher density per slot or different voltage should verify their platform documentation.
240-pin DDR3 registered ECC form factor
The 240-pin DDR3 registered ECC form factor is the single specification that decides compatibility. Only systems designed for this exact module type will recognise and initialise the memory correctly.
Kohokohdat
- 16 GB capacity supports large server workloads
- DDR3 1866 speed delivers PC3 14900 bandwidth
- ECC registered design protects data integrity
- CL13 latency at 1.50 V for stable timing
- 240 pin 2Rx4 module fits compatible System X servers
Tekniset tiedot
| Brand | IBM |
|---|---|
| Model | 46W0670 |
| Capacity | 16GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL13 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Lähetyspaino | 0.23 kg |
| Pakkauksen mitat | 178 × 51 × 13 mm |
Kysymyksiä tästä tuotteesta
Will this 240-pin DDR3 module fit my System X server memory slots?
The module uses the standard 240-pin DDR3 form factor designed for System X servers; verify your motherboard supports 1866 MHz registered ECC memory before installing.
What is the correct way to seat this registered ECC stick so the server recognises the full 16 GB?
Align the notch with the slot key, press firmly until both retaining clips click, then confirm in BIOS that the channel shows 16 GB at 1866 MHz with ECC active.
How do I know when this 2Rx4 registered kit should be replaced in a production server?
Monitor system logs for corrected ECC errors; a rising count or uncorrectable errors on this 16 GB module indicates it is time to swap the stick.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
104,99 $
0.00134829BTC
Varastossa
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
7,99 $
0.00010261BTC
Varastossa