Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular silver 2.5 inch SAS drive mounted in black plastic server caddy tray

IBM

IBM HUC101860CS4200 600GB 10000RPM 2.5" SAS 12Gbps internal hard drive

SKU CH-DKK5-TQ18K

A 600GB 10000RPM 2.5" SAS 12Gbps internal hard drive with caddy for server storage

  • 600 GB capacity supports data-intensive workloads
  • 10 000 RPM spindle speed reduces latency
  • SAS 12 Gbps interface enables fast transfers
  • 5 inch form factor fits dense server bays
  • Includes System X caddy for quick installation

600GB 10000RPM SAS drive for servers

This new IBM internal hard drive delivers 600GB of storage on a 2.5 inch SAS 12Gbps interface spinning at 10000RPM. It ships with a System X caddy so the drive fits directly into compatible IBM server bays. The unit is rated at zero hours, confirming factory-new condition. It targets administrators who need high-speed rotational storage for transactional workloads.

Thermals noise and power in normal use

The 2.5 inch form factor and 1.0 pound weight allow dense packing in rack chassis with standard server airflow. Rotational speed of 10000RPM produces typical enterprise acoustic output that is managed by the host system fans. Power draw follows the SAS 12Gbps specification for 2.5 inch drives during steady-state read and write operations. No additional cooling beyond standard server airflow is required.

Behaviour under sustained load

The 10000RPM spindle maintains consistent throughput for extended database scans and logging workloads. SAS 12Gbps signalling sustains the command queue without protocol bottlenecks during heavy I/O. The drive is designed for continuous operation in RAID arrays and virtualisation hosts where write intensity remains high. Zero-hour status means no prior wear affects long-term reliability.

Kohokohdat

  • 600 GB capacity supports data-intensive workloads
  • 10 000 RPM spindle speed reduces latency
  • SAS 12 Gbps interface enables fast transfers
  • 5 inch form factor fits dense server bays
  • Includes System X caddy for quick installation

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

How do I install the 2.5" SAS drive into the System X caddy and what step is often missed?

Slide the HUC101860CS4200 into the included System X tray until the connector seats firmly, then secure the retention screw; the step often missed is tightening that screw before inserting the caddy into the server bay.

What maintenance or replacement will the 600GB 10000RPM SAS drive need later?

The drive has no user-serviceable parts; plan to replace the entire unit if SMART attributes report reallocated sectors or if the 12Gb/s SAS link begins to show cyclic redundancy errors.

What limit appears first on the HUC101860CS4200 during sustained write workloads?

The 12Gb/s SAS interface and 10000RPM spindle cap sustained throughput, so the drive will hit its maximum sequential transfer ceiling before thermal throttling becomes a factor.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.