Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black metal drive caddy with plastic front for 2.5 inch SATA drives in 3.5 inch bay

ICY DOCK

ICY DOCK FlexiDOCK MB521SP-B 2.5" SATA drive enclosure

SKU CH-M4EF-4BE42

A single 2.5" SAS or SATA drive hot-swaps into any external 3.5" bay inside a full metal and ABS chassis

  • TypeSee Description
  • Hot-swap 2.5" SAS/SATA drives without tools
  • Fits any standard external 3.5" drive bay
  • Full metal chassis with ABS plastic protects the drive
  • Supports drive heights from 5 mm to 15 mm
  • Single-unit package ready for immediate installation

Single-Bay Hot-Swap Enclosure

The ICY DOCK FlexiDOCK MB521SP-B is a drive-bay adapter that lets you install one 2.5" SAS or SATA drive into any external 3.5" bay. It provides SATA hot-swap capability so drives can be exchanged without powering down the system. A full metal chassis combined with industrial ABS plastic protects the installed drive.

For System Builders and Service Technicians

This unit suits builders who need front-access removable storage in a standard 3.5" opening and technicians who swap drives frequently for maintenance or data transfer. It does not suit scenarios needing more than one drive per bay, drives using interfaces other than SAS or SATA, or internal-only mounting without a front-access opening.

2.5" Drive Height Compatibility

The enclosure accepts drives ranging from 5mm to 15mm in height, covering most 2.5" SAS and SATA HDDs and SSDs on the market. Verify your drive thickness before purchase; drives outside this range will not fit correctly.

Kohokohdat

  • Hot-swap 2.5" SAS/SATA drives without tools
  • Fits any standard external 3.5" drive bay
  • Full metal chassis with ABS plastic protects the drive
  • Supports drive heights from 5 mm to 15 mm
  • Single-unit package ready for immediate installation

Tekniset tiedot

BrandIcy Dock
TypeSee Description

Kysymyksiä tästä tuotteesta

How many 2.5" drives can the FlexiDOCK MB521SP-B hold at once?

The FlexiDOCK MB521SP-B accommodates one 2.5" SAS or SATA hard drive or SSD with a height between 5 mm and 15 mm.

Will the hot-swap feature work if I plug the enclosure into a standard SATA port on my motherboard?

Hot-swap functions when the host SATA controller and operating system support it; the enclosure itself passes the signal through without added electronics.

Does the MB521SP-B use a SATA or SAS interface to connect to the system?

The enclosure connects via a standard SATA data and power interface, accepting both SATA and SAS 2.5" drives inside the bay.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.