Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver metal rack enclosure holding three 3.5-inch drive bays in two 5.25-inch slots

ICY DOCK

ICY DOCK flexiDOCK MB830SP-B 3×3.5″ SATA/SAS Rack Server

SKU CH-ASEF-38QN9

Holds three 3.5-inch SATA or SAS drives in two 5.25-inch bays with tool-less hot-swap trays and full 6 Gb/s speed

  • TypeRack
  • Fits three 3.5-inch drives in two 5.25-inch bays
  • Full SATA III 6 Gb/s transfer speed supported
  • SAS single-channel operation with compatible host
  • Tool-less and screw-less drive installation
  • Three-year manufacturer warranty included

Three-drive density in two bays

The ICY DOCK flexiDOCK MB830SP-B fits three 3.5-inch SATA or SAS hard drives into a pair of 5.25-inch front bays. It is built for servers and workstations that need high capacity without sacrificing external accessibility. The tray-less mechanism lets technicians swap drives in seconds.

Full-speed SATA III with SAS option

Each bay delivers the full 6 Gb/s SATA III bandwidth so mechanical drives never hit a controller bottleneck. A SAS host connection enables single-channel SAS operation for environments that require that protocol. Installation is completely tool-less and requires no screws.

Steady throughput under continuous duty

The open-frame design lets chassis airflow pass directly over all three drives during sustained read or write workloads. No enclosure walls trap heat, so drive temperatures track the case ambient level. The unit is rated for constant operation in rack deployments.

Kohokohdat

  • Fits three 3.5-inch drives in two 5.25-inch bays
  • Full SATA III 6 Gb/s transfer speed supported
  • SAS single-channel operation with compatible host
  • Tool-less and screw-less drive installation
  • Three-year manufacturer warranty included

Tekniset tiedot

TypeRack

Kysymyksiä tästä tuotteesta

How do I install a 3.5-inch drive into the flexiDOCK MB830SP-B without screws?

Slide the drive straight into an empty bay until the connector seats; the tray-less latch locks it automatically. The step people miss is pushing until they feel a firm click, not just a light touch.

What part of the flexiDOCK MB830SP-B will need replacement after heavy use?

The SATA cables included with the unit are the only wear items; swap them if transfer errors appear after many insertion cycles.

What speed limit appears first when three drives run sustained transfers on the flexiDOCK MB830SP-B?

Each bay caps at 6 Gb/s SATA III, so the per-drive interface is the first bottleneck before any backplane or cabling limit is reached.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.