Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green Mini-ITX motherboard with silver heatsink and black ports

Intel

Intel BLKD2500CCE Atom D2500 NM10 4GB DDR3 Mini-ITX Motherboard

SKU CH-F6V5-AXH6W MPN BLKD2500CCE

Mini-ITX board with soldered 1.86 GHz Atom D2500 dual core, 4 GB DDR3-800/1066 SO-DIMM support, Intel NM10 chipset, integrated GMA 3600 graphics, two SATA 3 Gb/s ports, seven USB 2.0 headers.

  • Dual-core 1.86 GHz Atom D2500 handles everyday workloads efficiently
  • Mini-ITX 17 cm form factor fits compact chassis and embedded builds
  • Dual Intel 82574L gigabit LAN ports provide redundant wired connectivity
  • Seven USB 2.0 ports connect keyboards, mice, storage and peripherals simultaneously
  • Integrated GMA 3600 graphics drives VGA and DVI-I displays without add-in card

Embedded Intel Atom D2500 board

The Intel BLKD2500CCE is a Mini-ITX motherboard with a soldered 1.86 GHz Atom D2500 dual-core processor and NM10 Express chipset. It targets embedded appliances, digital signage players and thin-client terminals that need legacy I/O and a low-power x86 platform. The board ships with 4 GB of DDR3-800 memory already installed.

Straightforward Mini-ITX fit with legacy I/O

The board uses the standard 17 x 17 cm Mini-ITX mounting pattern and a single 20-pin ATX power connector. Installation is simple: secure the board, attach the power cable and connect peripherals. The only common issue is the soldered processor and memory, which prevent any future CPU or RAM upgrades.

Check power, display and serial needs

Verify that your chassis accepts a 17 x 17 cm Mini-ITX board and provides a 20-pin ATX supply. Confirm that VGA or DVI-I output matches your display and that the two RS-232 COM ports satisfy any serial-device requirements. Ensure the two SATA 3 Gb/sec connectors are sufficient for your storage plan.

Kohokohdat

  • Dual-core 1.86 GHz Atom D2500 handles everyday workloads efficiently
  • Mini-ITX 17 cm form factor fits compact chassis and embedded builds
  • Dual Intel 82574L gigabit LAN ports provide redundant wired connectivity
  • Seven USB 2.0 ports connect keyboards, mice, storage and peripherals simultaneously
  • Integrated GMA 3600 graphics drives VGA and DVI-I displays without add-in card

Tekniset tiedot

Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.

Kysymyksiä tästä tuotteesta

How do I confirm the 1.86 GHz Atom D2500 and 4 GB DDR3-800 are active after first boot?

Enter the Intel BIOS at startup; the main screen shows the 1.86 GHz processor speed and the total 4 GB DDR3 memory detected at 800 MHz.

Which cables or modules must I add to the boxed motherboard to reach the 2 SATA 3 Gb/sec and 7 USB 2.0 limits?

The board ships with an I/O shield only; you supply two SATA data cables, SATA power leads, and any front-panel USB headers to use all seven USB 2.0 ports.

Should I choose the single Mini-ITX version or a larger form factor for a 17 x 17 cm chassis?

Only the 17 x 17 cm Mini-ITX version exists for this BLKD2500CCE model, so it is the sole choice for that chassis size.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.