Intel
Intel D3-S4510 / D3-S4610 240GB 2.5-inch SATA 3.0 internal SSD
240GB 2.5-inch SATA 3.0 SSD with 64-layer 3D NAND for read-intensive workloads
- Device TypeInternal Solid State Drive (SSD)
- 240 GB capacity fits read-intensive workloads
- SATA 3.0 6 Gb/s interface enables easy legacy upgrades
- Sequential read up to 550 MB/s accelerates data access
- Sequential write up to 520 MB/s sustains throughput
- 64-layer 3D NAND improves reliability and power efficiency
240 GB SATA SSD for read-heavy workloads
This 2.5-inch Intel drive targets servers and storage arrays that need fast sequential reads. It replaces mechanical disks in legacy SATA bays without requiring infrastructure changes. The 240 GB capacity suits boot, logging or caching duties where write volume stays moderate.
Low power draw and quiet operation
Solid-state construction eliminates moving parts, so the drive runs silently and draws far less power than the hard drives it replaces. Typical operation stays cool inside standard drive cages, reducing cooling demand in dense racks. The SATA 3.0 link caps throughput at 6 Gb/s, keeping the controller within a modest thermal envelope.
550 MB/s sequential read ceiling
The published maximum sequential read speed of 550 MB/s defines the performance ceiling for read-intensive tasks. Write throughput tops out at 520 MB/s, so sustained heavy writes will hit that limit first. Match the drive to workloads that stay within these SATA bandwidth bounds.
Kohokohdat
- 240 GB capacity fits read-intensive workloads
- SATA 3.0 6 Gb/s interface enables easy legacy upgrades
- Sequential read up to 550 MB/s accelerates data access
- Sequential write up to 520 MB/s sustains throughput
- 64-layer 3D NAND improves reliability and power efficiency
Tekniset tiedot
| Device Type | Internal Solid State Drive (SSD) |
|---|
Kysymyksiä tästä tuotteesta
How do I install the 2.5-inch SATA 3.0 SSD into my server or laptop?
Mount the 7mm drive in a 2.5-inch bay, connect the SATA data and power cables, then initialise the 240GB volume in the OS; the step often missed is enabling AHCI mode in BIOS before cloning or installing the operating system.
What maintenance or replacement will the Intel D3-S4510 or D3-S4610 series need over its service life?
No mechanical parts require service; monitor SMART attributes for media wear and plan replacement once the drive reaches its rated write endurance or if reallocated sectors increase.
At what point does sustained write performance hit its limit on the 240GB model?
Sequential write speed is rated up to 520 MB/s; under continuous heavy writes the SLC cache can fill, after which throughput drops toward the native TLC NAND speed.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
