Intel
Intel SSDSC2KG240G801 D3-S4610 240GB 2.5" SATA enterprise SSD
- 2.5"
- 240GB
115,99 $
0.00143728BTC
Varastossa
Intel
Intel SSDSC2KG019T801 D3-S4610 1.92TB enterprise SSD
A 2.5-inch SATA enterprise SSD delivering 1.92TB capacity with 560 MB/s read and 510 MB/s write speeds for read-intensive workloads
- Form Factor2.5"
- Capacity1.92TB
- Memory Components3D NAND
- InterfaceSATA III
- Max Sequential ReadUp to 560 MBps
- Max Sequential WriteUp to 510 MBps
Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.
- 92TB capacity supports read-intensive workloads
- SATA 6Gb/s interface fits legacy 2.5" bays
- Up to 560 MB/s sequential read accelerates data access
- 2,000,000-hour MTBF ensures long-term reliability
- AES 256-bit hardware encryption protects data at rest
Purpose-built enterprise SATA SSD
The Intel D3-S4610 SSDSC2KG019T801 is a 2.5-inch enterprise solid-state drive with a 1.92TB capacity. It connects through a SATA III 6Gb/s interface and uses 64-layer 3D NAND technology. The drive targets read-intensive server workloads where consistent latency and data integrity matter more than peak throughput.
Suited for legacy SATA arrays, not PCIe slots
This drive fits directly into existing 2.5-inch SATA hot-plug bays and works with standard SATA controllers. Enhanced power-loss data protection, AES 256-bit hardware encryption and end-to-end data protection protect data during unexpected outages. Buyers who need PCIe attachment, higher sequential throughput or greater write endurance should look at other form factors.
The 10.0 PBW endurance rating decides fit
A lifetime write budget of 10.0 PBW and an MTBF of 2,000,000 hours define how long the drive survives sustained write traffic. Sequential reads reach 560 MBps and writes reach 510 MBps while random reads hit 97,000 IOPS and random writes hit 46,500 IOPS. Active power draw is 3.0W and idle power is 1.0W across a 0°C to 70°C operating range.
Kohokohdat
- 92TB capacity supports read-intensive workloads
- SATA 6Gb/s interface fits legacy 2.5" bays
- Up to 560 MB/s sequential read accelerates data access
- 2,000,000-hour MTBF ensures long-term reliability
- AES 256-bit hardware encryption protects data at rest
Tekniset tiedot
| Brand | Intel |
|---|---|
| Series | D3-S4610 |
| Model | SSDSC2KG019T801 |
| Part Number | SSDSC2KG019T801 |
| Form Factor | 2.5" |
| Capacity | 1.92TB |
| Memory Components | 3D NAND |
| Interface | SATA III |
| Max Sequential Read | Up to 560 MBps |
| Max Sequential Write | Up to 510 MBps |
| 4KB Random Read | Up to 97,000 IOPS |
| 4KB Random Write | Up to 46,500 IOPS |
| Read Latency | 36 µs |
| Write Latency | 37 µs |
| MTBF | 2,000,000 hours |
| Features | Endurance Rating (Lifetime Writes): 10.0 PBW Enhanced Power Loss Data Protection: Yes Hardware Encryption: AES 256-bit Temperature Monitoring and Logging: Yes End-to-End Data Protection: Yes Compatible with existing SATA setups for an easy storage upgrade Up to 6x lower power and lower cooling requirements than 2.5-inch HDDs 3.2x more data in the same amount of space Up to 4.2x lower annualized failure rates (AFR) for fewer drive replacements Up to 300x more IOPS/TB than HDDs |
| Power Consumption (Idle) | 1.0W |
| Power Consumption (Active) | 3.0W |
| Operating Temperature | 0°C ~ +70°C |
| Max Shock Resistance | 1000G / 0.5 msec |
| Max Vibration Resistance | Operating: 2.17 GRMS Non-Operating: 3.13 GRMS |
| Height | 7.00mm |
| Width | 4.750 |
| Weight | 1 |
| Lähetyspaino | 0.14 kg |
| Pakkauksen mitat | 145 × 116 × 20 mm |
Tämän mallin muut versiot
4 lisää samasta mallistosta
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Intel
Intel D3-S4610 SSDSC2KG480G801 480GB 2.5" Sata enterprise SSD
- 2.5"
- 480GB
145,99 $
0.00180902BTC
Varastossa
Intel
Intel D3-S4610 SSDSC2KG960G801 960GB 2.5" SATA enterprise SSD
- 2.5"
- 960GB
188,99 $
0.00234185BTC
Varastossa
Intel
Intel D3-S4610 3.84TB SATA 2.5" Enterprise SSD SSDSC2KG038T801
- 2.5"
- 3.84TB
380,99 $
0.00472101BTC
VarastossaKysymyksiä tästä tuotteesta
What real-world throughput does the SATA III 600 interface cap this drive at?
The SATA III 600 interface limits sequential reads to 560 MBps and sequential writes to 510 MBps, with 97,000 IOPS random read and 46,500 IOPS random write.
What physical space and mounting does the 2.5-inch 7mm form factor require?
It fits a standard 2.5-inch drive bay with 7 mm height clearance and uses the SATA data and power connectors on the rear edge.
How is the drive installed in a server, and which step is often missed?
Slide the drive into the hot-swap caddy until the SATA connectors seat firmly, secure the caddy latch, then enable AES 256-bit encryption in the RAID controller BIOS — a step often skipped.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
