Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with two RJ45 ports and silver metal bracket

Intel

Intel X710DA2 dual-port 10GbE network card

SKU CH-3GJ4-RV7M5 MPN X710DA2

Dual-port 10GbE PCIe 3.0 x8 adapter with RJ45 connectors and virtualization offloads

  • Speed10Gbps
  • Connectors2 x RJ45
  • InterfacePCIe 3.0 (8.0 GT/s)
  • FeaturesDual-port 10GbE adapter PCI Express (PCIe) 3.0, x8 Exception
  • Weight10
  • Package ContentsEthernet Converged Network Adapter X540-T1 Information CD Lo

Model X710DA2

Yliviivatut versiot ovat olemassa, mutta niitä ei ole varastossa täällä.

Connector SFP+ (DAC and Fiber Optic)

  • RJ45
  • SFP+ (DAC and Fiber Optic)

Ports 2 ports

  • Dual 10GbE ports double server throughput
  • PCIe 3.0 x8 interface delivers 8.0 GT/s bandwidth
  • Network virtualization offloads cut CPU load for VXLAN and Geneve traffic
  • Intel Flow Director steers application packets in hardware
  • Energy Efficient Ethernet reduces power at 100, 1, 2.5, 5 and 10Gbps speeds

Dual-port 10GbE server adapter

The Intel X710DA2 is a PCIe 3.0 x8 network card with two RJ45 ports that each run at 10Gbps. It targets data-centre servers and network appliances that need hardware offloads for virtualised workloads and NFV deployments. Low-power design and Energy Efficient Ethernet help keep platform thermals in check. The adapter is optimised for DPDK and supports Dynamic Device Personalization for flexible packet processing.

Installation notes and common issues

The card fits a standard PCIe 3.0 x8 slot and ships with a low-profile bracket for 2U or shorter chassis. Driver support is mature across current Linux kernels and Windows Server releases; firmware updates are applied through the OS toolchain. A frequent oversight is leaving the link at 1Gbps because the switch port is not configured for 10GBASE-T or the cable category is below Cat6a. Verify auto-negotiation and enable flow control on both ends to avoid packet loss.

Pre-purchase checklist

Confirm the server has an open PCIe 3.0 x8 slot with enough physical clearance for the dual RJ45 connector. The platform must supply up to 45 W for the adapter, so check the system power budget and auxiliary power cabling. Ensure the operating system or hypervisor includes the Intel 700 Series driver or plan to install it separately. Finally, validate that the top-of-rack switches support 10GBASE-T and the cabling plant meets the required category for the desired link speed.

Kohokohdat

  • Dual 10GbE ports double server throughput
  • PCIe 3.0 x8 interface delivers 8.0 GT/s bandwidth
  • Network virtualization offloads cut CPU load for VXLAN and Geneve traffic
  • Intel Flow Director steers application packets in hardware
  • Energy Efficient Ethernet reduces power at 100, 1, 2.5, 5 and 10Gbps speeds

Tekniset tiedot

BrandIntel
ModelX710DA2
Speed10Gbps
Connectors2 x RJ45
InterfacePCIe 3.0 (8.0 GT/s)
FeaturesDual-port 10GbE adapter
PCI Express (PCIe) 3.0, x8
Exceptional Low Power Adapter
Network Virtualization offloads including Geneve, VXLAN and NVGRE
Intel Ethernet Flow Director for hardware based application traffic steering
Intel Data Plane Developer Kit (DPDK) optimized for efficient packet processing
Excellent small packet performance fornetwork appliances and Network Function Virtualization (NFV)
Intelligent offloads to enable high performance with Intel Xeon servers
I/O virtualization innovations for maximum performance in a virtualized server.
Unified networking providing a sing
Weight10
Package ContentsEthernet Converged Network Adapter X540-T1
Information CD
Low-Profile Bracket
Lähetyspaino0.68 kg
Pakkauksen mitat229 × 145 × 23 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How can I confirm the X710DA2 is operating at 10Gbps after installation?

Check the link speed in your OS network settings or switch management interface; it should show 10Gbps full-duplex on each active RJ45 port.

What accessories are included with the Intel X710DA2 and what must I source separately?

The box contains the dual-port adapter, a low-profile bracket, and an information CD; you will need Cat6a or better cabling and a PCIe 3.0 x8 slot.

Which variant of the Intel 700 series should I choose for dual-port 10GBASE-T connectivity?

Select the X710DA2 model; it provides two RJ45 ports at 10Gbps with PCIe 3.0 x8 interface and the listed virtualization offloads.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.