Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 16 ft DisplayPort 2.1 male-to-male cable with triple shielding

Jansicotek

Jansicotek DisplayPort 2.1 Cable A0108 16 ft 80Gbps 16K@60Hz 8K@120Hz 4K@240Hz

SKU CH-WMQ5-9SQ71

A 16 ft Jansicotek DisplayPort 2.1 cable delivering 80 Gbps bandwidth with UHBR10, HDR and HDCP support for 16K at 60 Hz, 8K at 120 Hz and 4K at 240 Hz gaming

  • TypeDisplayPort Cable
  • ColorBlack
  • Length16 ft.
  • Cable Length16 ft.
  • Connector Number1
  • Connect From1 x DisplayPort2.1

Cable Length 16.5 Feet

  • VESA-certified 80 Gbps bandwidth enables 16K at 60 Hz
  • Triple-shielded solid-copper conductors prevent signal loss over 16 ft
  • Supports 4K at 240 Hz and 8K at 120 Hz for high-refresh gaming
  • Backward compatible with DisplayPort 1.4 and 1.2 displays
  • HDR, HDCP 2.2, DSC 1.2a and VRR supported for smooth visuals

DisplayPort 2.1 Cable A0108

This 16 ft DisplayPort 2.1 cable connects a graphics card to a monitor with male-to-male terminals. It is built for users who need 16K at 60 Hz, 8K at 120 Hz or 4K at 240 Hz over a single link. The solid copper conductor and triple shielding support the 80 Gbps UHBR10 bandwidth. Buyers who need a shorter run or a right-angle connector should look elsewhere.

Sustained Load Behaviour

The cable maintains 80 Gbps throughput across the full 16 ft length without signal loss or added latency. HDR, DSC 1.2a and HDCP 2.2 stay active during extended gaming or video sessions. Forward error correction keeps the link stable at 4K 240 Hz and 8K 120 Hz. It is not suited for runs longer than 16 ft or for installations that require in-wall fire ratings.

DisplayPort 2.1 Interface Limits

The interface tops out at 80 Gbps using UHBR10, enabling 16K 60 Hz with DSC and 4K 240 Hz uncompressed. Backward compatibility covers DP 1.4 and DP 1.2 devices, but those links fall back to HBR3 speeds. VRR, FreeSync and G-Sync operate within the 80 Gbps ceiling. The cable cannot exceed the 16 ft length or the 80 Gbps bandwidth defined by the UHBR10 tier.

Kohokohdat

  • VESA-certified 80 Gbps bandwidth enables 16K at 60 Hz
  • Triple-shielded solid-copper conductors prevent signal loss over 16 ft
  • Supports 4K at 240 Hz and 8K at 120 Hz for high-refresh gaming
  • Backward compatible with DisplayPort 1.4 and 1.2 displays
  • HDR, HDCP 2.2, DSC 1.2a and VRR supported for smooth visuals

Tekniset tiedot

BrandJansicotek
ModelA0108
TypeDisplayPort Cable
ColorBlack
Length16 ft.
Cable Length16 ft.
Connector Number1
Connect From1 x DisplayPort2.1
Connect To1 x DisplayPort2.1
Connector DetailDisplayPort to DisplayPort 2.1 Cable 16K@60Hz
Terminal GenderMale to Male
SpeedTest Value
SpecificationsRefresh Rate: 16K@60Hz, 8K@60/120Hz, 4K@144Hz, 4K@165Hz, 2K@360Hz
Version: DisplayPort 2.1 Cable
Bandwidth: Support up to 80Gbps
Features: Supports HBR3 / HDCP 2.2 / HDCP1.4 / HDR / DPCP 1.0 / DP++ / Stereoscopic 3D video / Multi-stream transport (MST) / DSC
Specifications: FEC Forward Error Correction and maximum 32 audio channels
Backwards Compatible: DisplayPort 2.0 / 1.4 / 1.3 / 1.2 / 1.1 / 1.1a / 1.0
Conductor Material: Tinned Copper
Connector Type: DisplayPort Male to DisplayPort Male
?
16K Displayport Cable will bring you a new visual experience and gaming experience, whether
ShieldingTriple-shielded
ConductorSolid Copper Conductor
Constructiontest123
Refresh Rate16K(15360x8640) 60Hz with DSC, 8K 120Hz, 4K 240Hz/165Hz/120Hz/144Hz Support
Sound QualityProduction Test
FeaturesDisplayPort cable not only can support 3D video but also can support the resolution up to 16K@60Hz, 8K@60/120Hz and 4K@165Hz, ideal for doing high-performance gaming or watching an HD movie on your television.
?
Designed with tinned copper and triple-layer shielding, the DP Cable is enough to transfer high-quality and stable video and audio signals, no worry about visual and audio glitches, artifacts, and audio/video synchronization problems. urability under heavy usage and multiple plugging and unplugging.
?
Superior Vision with DisplayPort 2.1
DisplayPort 2.1 can transmit up to 80G
Windows VistaWorks with Windows Vista
Disclaimer? 8.19 x 3.7 x 0.63 inches

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the 16 ft Jansicotek DisplayPort 2.1 cable generate noticeable heat or draw extra power when running at 80Gbps all day?

The cable is passive with solid copper conductors and triple shielding, so it produces no measurable heat and draws no external power during continuous 80Gbps operation.

What must my monitor and graphics card already provide for this DisplayPort 2.1 cable to deliver 4K@240Hz?

Both the monitor and the graphics card need native DisplayPort 2.1 ports with UHBR10 or higher support; the cable is male-to-male and requires no adapters or external power.

Will this 16 ft cable work reliably with my older GTX 980 and a DP 1.4 monitor?

Yes, the cable is backward compatible with DisplayPort 1.4 and 1.2, so it will carry the GTX 980's maximum DP 1.4 signal over 16 ft without signal loss.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.