Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Black 120 mm square case fan with ARGB lighting on corners and frame, nine blades visible, 25 mm thick

JONSBO

JONSBO HF2-120BR 120 mm ARGB Case Fan Black

SKU CH-ETNJ-JE64K

A 120 mm ARGB case fan with reversed airflow, FDB bearing and a 800-2200 RPM range delivering 75-80 CFM at 29.5 dBA

  • Fan Counts1 Fan
  • RPM800-2200 PRM
  • Air Flow75-80 CFM
  • Air Pressure3.14mmH20
  • Noise Level29.5dBA
  • Power Connector3 Pin 5V
  • 120 mm fan delivers 75-80 CFM airflow for effective case cooling
  • FDB bearing runs at 29.5 dBA for quiet operation
  • 5V ARGB lighting shines from corner matrix points and border lines
  • 800-2200 RPM range adapts to thermal demand
  • 14 mmH₂O static pressure pushes air through restrictive filters

Fan purpose and audience

The JONSBO HF2-120BR is a 120 mm ARGB case fan built for PC builders who want controllable airflow and addressable lighting in a single black frame. It suits fresh builds or upgrades where a 12 cm mounting point is available and a 5 V ARGB header can drive the LEDs.

Practical limits of the 3-pin 5 V interface

Speed ranges from 800 to 2200 RPM, delivering 75 to 80 CFM of airflow and 3.14 mmH₂O of static pressure at a maximum of 29.5 dBA. The 3-pin 5 V connector means voltage control rather than PWM, so the motherboard or controller must support 5 V ARGB and voltage-based fan regulation for full function.

Build quality and daily implications

The frame measures 120 mm by 120 mm by 25 mm and uses a fluid-dynamic bearing with a copper sleeve for smoother rotation. Nine blades and corner matrix lighting give a clean look from the front while the rear border emits continuous light. The 5 V ARGB pinout requires a compatible header; boards with only 12 V RGB cannot drive this fan.

Kohokohdat

  • 120 mm fan delivers 75-80 CFM airflow for effective case cooling
  • FDB bearing runs at 29.5 dBA for quiet operation
  • 5V ARGB lighting shines from corner matrix points and border lines
  • 800-2200 RPM range adapts to thermal demand
  • 14 mmH₂O static pressure pushes air through restrictive filters

Tekniset tiedot

BrandJONSBO
ModelHF2-120B
Part NumberHF2-120B
Fan Counts1 Fan
RPM800-2200 PRM
Air Flow75-80 CFM
Air Pressure3.14mmH20
Noise Level29.5dBA
Power Connector3 Pin 5V
ColorBlack
LEDARGB
Features120 mm High Performance Fan
Dimensions120mm(L)*120mm(W)*25mm(H)

Kysymyksiä tästä tuotteesta

Should I pick the reversed-blade HF2-120BR or the standard HF2-120B for my build?

Choose the HF2-120BR when you need airflow directed toward the motherboard side — ideal for bottom-intake or side-panel mounting — while the standard HF2-120B suits conventional front or rear positions.

What does the 80 CFM peak airflow deliver inside a real chassis?

At 80 CFM the fan moves enough air to cool a mid-range CPU and GPU combo in a typical ATX case, provided intake and exhaust paths are balanced and filters are clean.

The fan uses a 3-pin 5 V ARGB connector — what does that limit?

The 3-pin 5 V ARGB header lets the motherboard control lighting per LED, but speed control relies on voltage regulation rather than PWM, so minimum speed is higher than on 4-pin models.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.