Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two purple ESP32 development boards with 38-pin headers, Type-C and micro USB ports, CP2102 chips

KEHIPI

KEHIPI ESP32-DevKitC 38PIN WROOM-32U 2sets CP2102 Type-C Micro USB

SKU CH-B8MA-ZDD78

Two ESP32 development boards with 38-pin expansion boards, CP2102 USB-to-serial chips and both Type-C and Micro USB interfaces for Wi-Fi and Bluetooth prototyping

  • Dual-core ESP32 enables Wi-Fi and Bluetooth connectivity
  • CP2102 USB-to-UART bridge simplifies programming and debugging
  • 38-pin expansion board adds extensive I/O for prototyping
  • Type-C and Micro USB ports give flexible power options
  • Two complete sets included for parallel development or spares

ESP32 Development Board 38-Pin Dual Pack

This KEHIPI kit supplies two ESP32-DevKitC core boards each paired with a 38-pin expansion board. The boards target makers, students and engineers who need a ready-to-use platform for Wi-Fi and Bluetooth IoT prototypes. Both USB-C and Micro-USB connectors are fitted for flexible power and programming options.

CP2102 USB-UART limits host-side speed

The on-board CP2102 bridge handles serial communication over either USB port. Its maximum baud rate constrains flashing and debug throughput, so very large firmware images take longer to transfer than on native USB MCUs. The dual-port layout does not increase bandwidth; only one connector is active at a time.

38-pin header count fixes shield compatibility

Each expansion board breaks out exactly 38 pins from the ESP32-WROOM-32U module. Shields or jumper wires must match this pin count and pitch; boards designed for 30-pin or other footprints will not align. The fixed header geometry is the single specification that decides whether the kit fits a given project.

Kohokohdat

  • Dual-core ESP32 enables Wi-Fi and Bluetooth connectivity
  • CP2102 USB-to-UART bridge simplifies programming and debugging
  • 38-pin expansion board adds extensive I/O for prototyping
  • Type-C and Micro USB ports give flexible power options
  • Two complete sets included for parallel development or spares

Tekniset tiedot

BrandAITRIP

Kysymyksiä tästä tuotteesta

Should I pick the Type-C or Micro USB version of the ESP32-DevKitC?

The package includes two complete sets, each with a core board that provides both Type-C and Micro USB interfaces, so you receive both versions in one purchase.

What does the dual-core ESP32 mean for my project?

The dual-core ESP32-DevKitC-32 runs two processing cores, allowing WiFi and Bluetooth tasks to run alongside your main application code without blocking.

How does the CP2102 interface affect upload speed?

The CP2102 USB-to-UART bridge handles serial programming and debug output; its practical throughput is limited by the UART baud rate you configure in the IDE.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.