Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two black-and-green ESP32-S3 boards with 44-pin expansion adapters

KEHIPI

KEHIPI ESP32-S3 Development Board 44Pin 8M PSRAM Expansion Adapter

SKU CH-SR8D-E6RZG MPN ESP32-S3

Expands each GPIO pin into two connections on a 44-pin board with 8 MB PSRAM and 2.4 GHz WiFi plus Bluetooth 5

  • Dual-core 240 MHz LX7 processor powers demanding IoT projects
  • 36 programmable GPIOs with 44-pin expansion adapter multiply connection options
  • 4 GHz WiFi 802.11 b/g/n and Bluetooth 5 enable long-range wireless links
  • Two pre-soldered DevKitC-1 boards plus two breakout boards ready for immediate development
  • 6 mm thick black-green PCB ensures durable reliable prototyping

Dual development kit with expansion boards

This kit supplies two pre-soldered ESP32-S3-DevKitC-1 boards and two GPIO breakout boards. Each development board integrates 2.4GHz WiFi and Bluetooth 5 with a dual-core LX7 processor running at 240MHz. The expansion boards double each GPIO pin, giving makers extra connection points for sensors and actuators.

Suitable for prototyping dual-node IoT projects

Engineers building mesh networks or redundant sensor nodes can use both boards simultaneously. Projects that require only a single microcontroller or need more than 36 programmable GPIOs per board should consider alternative hardware.

44Pin expansion adapter doubles GPIO count

The included breakout boards convert every GPIO on the 44Pin header into two accessible pins. This layout lets you reuse all 36 programmable GPIOs without soldering additional headers.

Kohokohdat

  • Dual-core 240 MHz LX7 processor powers demanding IoT projects
  • 36 programmable GPIOs with 44-pin expansion adapter multiply connection options
  • 4 GHz WiFi 802.11 b/g/n and Bluetooth 5 enable long-range wireless links
  • Two pre-soldered DevKitC-1 boards plus two breakout boards ready for immediate development
  • 6 mm thick black-green PCB ensures durable reliable prototyping

Tekniset tiedot

BrandAITRIP

Kysymyksiä tästä tuotteesta

What Wi-Fi standard does the ESP32-S3 module support and what bandwidth does it use?

The module supports 802.11 b/g/n Wi-Fi with a 40 MHz bandwidth.

What are the physical dimensions and mounting details of the expansion board?

The expansion board has a PCB thickness of 1.6 mm and is coloured black and green.

How is the development board powered and connected for programming?

The board is powered and programmed via the USB-to-UART port or the ESP32-S3 USB port.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.