Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver rectangular ATX power supply unit with 4-pin connector visible

KHACHIMO

KHACHIMO 280 286 282 Pro G6 G5 MT 4Pin 180W Power Supply

SKU CH-VBPH-BDW67

An ATX power supply for select HP desktops, delivering 180 W with 80 PLUS Gold efficiency and a zero-RPM fan mode for silent low-load operation

  • TypeATX
  • Faster wake from sleep with Modern Standby support
  • Lower power draw thanks to 80 PLUS Gold efficiency
  • Near-silent operation via Zero RPM fan mode
  • Clean, stable power delivery using Resonant LLC with DC-to-DC conversion
  • 180W output for compatible 280 286 282 Pro G6 G5 MT systems

KHACHIMO 180W Power Supply for HP ProDesk

This KHACHIMO 180 watt ATX power supply is built for HP ProDesk 280, 282, 286, G5 and G6 Microtower chassis. It delivers 180 watts of continuous power through a 4-pin connector, matching the PA-1181-6 and L70042-001 part numbers. The unit is new and carries 80 PLUS Gold certification for high efficiency.

Suits owners of compatible HP ProDesk MT systems

This unit fits builders replacing a failed or noisy PSU in the listed HP ProDesk Microtower models. It supports Modern Standby for rapid wake times and features a Zero RPM fan mode for silent low-load operation. Buyers needing higher wattage for discrete graphics cards or workstations with different form factors should look elsewhere.

180 watt output via 4-pin ATX connector

The single specification that decides compatibility is the 180 watt rating delivered through the proprietary 4-pin connector used by these specific HP ProDesk models. Verify your chassis is a 280, 282, 286, G5 or G6 Microtower and that the original part number matches PA-1181-6 or L70042-001 before purchase.

Kohokohdat

  • Faster wake from sleep with Modern Standby support
  • Lower power draw thanks to 80 PLUS Gold efficiency
  • Near-silent operation via Zero RPM fan mode
  • Clean, stable power delivery using Resonant LLC with DC-to-DC conversion
  • 180W output for compatible 280 286 282 Pro G6 G5 MT systems

Tekniset tiedot

TypeATX

Kysymyksiä tästä tuotteesta

How do I confirm the 180W unit is running correctly after installation?

Verify the system boots, check that the 80 PLUS Gold certification badge appears in monitoring software, and listen for the Zero RPM fan staying silent at idle.

Which cables and connectors are included with the PSU, and what must I source separately?

The 4-pin CPU connector is attached; all other ATX cables are fixed to the unit so no extra cables are required for a standard build.

Which of the listed model codes — 280, 286, 282, G6, G5, MT — matches my chassis?

Each code identifies a compatible HP ProDesk or EliteDesk SFF chassis; match the code printed on your existing PSU label to the one in the product title.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.