Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver rectangular server power module with rear fan grille and power connector

KHACHIMO

KHACHIMO DPS-600RB A 600W Server Power Module

SKU CH-4G5S-Y6JCF

New 600 W ATX server power module, tested and working, first listed March 2024

  • TypeATX
  • 600 W output powers demanding server builds
  • ATX form factor fits standard chassis
  • Tested working before shipment ensures reliability
  • Good-quality components support stable operation
  • First listed March 2024 confirms current design

600W Server Power Module

The KHACHIMO DPS-600RB A is a 600W server power module built to the ATX form factor. It is intended for technicians and system integrators who need a replacement or spare unit for compatible rackmount or pedestal servers. The module delivers standard ATX voltage rails for typical server workloads. Condition is new and each unit is test working before shipment.

Sustained load behaviour

The unit is rated to provide 600W of continuous output rather than only a short peak figure. This steady capacity supports server configurations that run at high utilisation for extended periods without tripping protection circuits. Good quality components help maintain stable voltages across the rails during prolonged operation. Thermal design follows the ATX specification for server environments.

ATX interface limits

The ATX form factor defines the physical dimensions, connector pinout and voltage tolerances this module must meet. Those standards set the practical ceiling for power delivery and cable compatibility in supported chassis. Builders must verify that their server backplane and cabling match the ATX pin assignments used here. No additional proprietary interfaces or extended ratings are specified for this model.

Kohokohdat

  • 600 W output powers demanding server builds
  • ATX form factor fits standard chassis
  • Tested working before shipment ensures reliability
  • Good-quality components support stable operation
  • First listed March 2024 confirms current design

Tekniset tiedot

TypeATX

Kysymyksiä tästä tuotteesta

How much heat and noise does the 600 W module produce when running continuously?

The unit is a 600 W ATX server power module; under full load it will draw up to 600 W from the wall and exhaust heat through its internal fan, so expect typical server-grade airflow and audible fan noise during sustained operation.

Which cables or connectors must my system already provide for this module to work?

As an ATX-type server power module it requires a compatible server chassis or backplane that supplies the matching ATX power connector and mounting points; no additional cables are included.

Will this power module work alongside older ATX motherboards and drive bays I plan to keep?

Yes — it follows the ATX form factor and power specification, so it can power legacy ATX motherboards, drive bays and peripherals that use standard ATX connectors.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.