NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Kingston Technology Corp.
A 32 GB DDR4 registered ECC module running at 2933 MHz with CL21 latency and 1.2 V operation
This Kingston Server Premier module provides 32GB of DDR4 memory rated at 2933 MT/s with CL21 timings. It uses a registered design with ECC for error correction in server environments. The module operates at a standard 1.20V voltage. It is built for systems that require registered DIMMs.
Registered buffering reduces electrical load on the memory controller during continuous operation. ECC detects and corrects single-bit errors to maintain data integrity under sustained workloads. The CL21 latency and 1.20V voltage support stable performance at the rated 2933 speed. This combination suits server tasks that run for extended periods.
Verify that your motherboard supports DDR4 registered ECC DIMMs in a 288-pin form factor. The system must accept 1Rx4 rank configuration and 1.20V operation. Confirm the memory controller can run at 2933 MT/s or will downclock appropriately. This module is not compatible with platforms requiring unbuffered non-ECC memory.
| Brand | Kingston |
|---|---|
| Series | Server Premier |
| Model | KSM29RS4/32HAR |
| Capacity | 32GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Timing | 21-21-21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
The registered buffer reduces electrical load on the memory controller, and the 1.20V DDR4 voltage limits power draw, helping the module run cooler and quieter during all-day server workloads.
A DDR4 288-pin DIMM slot that supports registered ECC memory at 2933 MT/s and can supply 1.20V; the board must also accept 1Rx4 organisation for full 32GB capacity.
JEDEC DDR4 modules negotiate a common speed at boot, so this 2933 MT/s DIMM will automatically run at the highest frequency all installed modules share, preserving stability.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?