NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Kingston Technology Corp.
16 GB DDR4 SO-DIMM runs at 3200 MHz with CL22 latency and ECC for server stability
This 16GB DDR4 SO-DIMM operates at 3200 MHz with CL22 timings and 1.20V voltage. It uses a 260-pin form factor and includes ECC for data integrity in server workloads. The module is built with Micron R-die chips in a 2Rx8 configuration without a heat spreader.
Ideal for systems that need registered error correction in a compact SO-DIMM slot. Not for desktop boards that only accept non-ECC UDIMMs or laptops lacking ECC support in the BIOS. Builders needing higher capacity per slot or lower latency timings should evaluate other modules.
The single specification that decides fit is the DDR4 3200 CL22 ECC 2Rx8 260-pin SO-DIMM standard. Verify your platform accepts ECC SO-DIMMs at this speed and rank configuration before purchase. The 1.20V JEDEC voltage matches mainstream DDR4 server requirements.
| Brand | Kingston |
|---|---|
| Model | KSM32SED8/16MR |
| Capacity | 16GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Timing | 22-22-22 |
| Voltage | 1.20V |
| ECC | Yes |
| Rank | 2Rx8 |
| Chipset | DRAM: MICRON (R-DIE) |
| Heat Spreader | No |
| Lähetyspaino | 0.01 kg |
| Pakkauksen mitat | 25 × 25 × 25 mm |
The module operates at 1.20 V, the standard voltage for DDR4 SO-DIMMs; actual power draw varies with workload and platform but remains within normal DDR4 limits.
It needs a 260-pin DDR4 SO-DIMM slot supporting DDR4 3200 (PC4-25600) with ECC capability; the system must also accept 2Rx8 registered or unbuffered modules depending on platform.
The module runs at 3200 MHz with CL22 latency; when mixed with slower DDR4, the system typically downclocks all memory to the lowest common speed and loosest timings.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?