Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two black low-profile DDR4 DIMMs with heat spreaders, 288-pin dual-channel kit

Kingston Technology Corp.

Kingston Technology Corp. KF432C16BB1K2/32 FURY Beast 32GB (2x16GB) DDR4 3200 CL16 desktop RAM

SKU CH-8T10-99M49 MPN KF432C16BB1K2/32

32 GB dual-channel DDR4 kit at 3200 MT/s with CL16 timings and a low-profile black heat spreader

  • Capacity32GB (2 x 16GB)
  • Type288-Pin PC RAM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL16
  • Timing16-18-18
  • Voltage1.35V

Capacity 32GB (2 x 16GB)

Speed DDR4 3200 (PC4 25600)

Latency · Color · LED · Fan · Option CL16 · Black · None · No

  • 32 GB dual-channel kit expands system memory for multitasking
  • DDR4 3200 speed with CL16 latency delivers responsive performance
  • Intel XMP 2.0 profile enables one-click overclocking
  • Low-profile black heat spreader keeps modules cool under load
  • 35 V operation balances speed with power efficiency

Kit configuration

The Kingston FURY Beast kit delivers 32GB of DDR4 memory across two 16GB modules in a dual-channel arrangement. It operates at 3200MT/s with CL16 timings of 16-18-18 at 1.35V. Intel XMP 2.0 profiles are supported for automatic configuration on compatible platforms. The modules are unbuffered, non-ECC and designed for desktop systems using 288-pin DIMM slots. Black heat spreaders cover each PCB.

Thermals and power

Low-profile heat spreaders on both modules dissipate heat during sustained workloads such as gaming or video editing. The 1.35V operating voltage keeps power draw modest for DDR4 at this frequency. No LEDs or active cooling are present, so the kit adds no audible noise to the build. Standard airflow across the motherboard is sufficient for normal operation.

Build and installation

Each module uses a standard-height black heat spreader that fits most CPU coolers and compact cases without clearance issues. The 288-pin edge connector ensures broad motherboard compatibility for DDR4 platforms. As a matched dual-channel kit, the pair is validated to run together at rated speed, reducing the chance of manual tuning. The design targets straightforward installation for system builders and upgraders alike.

Kohokohdat

  • 32 GB dual-channel kit expands system memory for multitasking
  • DDR4 3200 speed with CL16 latency delivers responsive performance
  • Intel XMP 2.0 profile enables one-click overclocking
  • Low-profile black heat spreader keeps modules cool under load
  • 35 V operation balances speed with power efficiency

Tekniset tiedot

BrandKingston
SeriesFURY Beast
ModelKF432C16BB1K2/32
Part NumberKF432C16BB1K2/32
Capacity32GB (2 x 16GB)
Type288-Pin PC RAM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL16
Timing16-18-18
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered / Unregistered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 2.0
ColorBlack
Heat SpreaderYes
FeaturesKingston FURY KF432C16BB1K2/32 is a kit of two 2G x 64-bit
(16GB) DDR4-3200 CL16 SDRAM (Synchronous DRAM) 2Rx8,
memory module, based on sixteen 1G x 8-bit FBGA components per
module. Each module kit supports Intel® Extreme Memory
Profiles (Intel® XMP) 2.0. Total kit capacity is 32GB. Each
module has been tested to run at DDR4-3200 at a low latency timing
of 16-18-18 at 1.35V
Cost-efficient, high-performance DDR4 upgrade
Intel XMP-ready
Ready for AMD Ryzen
Speeds up to 3733MHz and kit capacity up to 128GB
Plug N Play functionality at 2666MHz
Recommend UseAMD & Intel Compatible
LED ColorNone
Lähetyspaino0.10 kg
Pakkauksen mitat170 × 95 × 13 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I install the 288-pin modules and enable the XMP 2.0 profile so they run at 3200 instead of the default 2666?

Insert both sticks into the motherboard slots that form the dual-channel pair, press until the latches click, then enter the BIOS and select the Intel XMP 2.0 profile to apply the 16-18-18 timing at 1.35V.

What maintenance or replacement will the low-profile heat spreader need over time?

The black heat spreader is passive and requires no servicing; only occasional dust removal with compressed air is needed to maintain airflow across the modules.

At what point does the 1.35V limit appear first during sustained heavy workloads?

The modules are rated for 1.35V at 3200 with CL16; pushing voltage beyond that spec risks instability and is not covered by the validated XMP profile.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.