Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Eight silver DDR5 RDIMM sticks with black heat spreaders, 288-pin, 256 GB kit

Kingston Technology Corp.

Kingston Technology Corp. KF560R32RBK8-256 server RAM

SKU CH-6JWY-SS0ZP MPN KF560R32RBK8-256

256 GB DDR5 registered ECC memory kit with eight 32 GB modules at 6000 MHz CL32

  • Capacity256GB (8 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6000 (PC5 48000)
  • CAS LatencyCL32
  • Timing32-38-38
  • Voltage1.35V
  • 256 GB total capacity across eight 32 GB modules for high-density server workloads
  • DDR5 6000 MT/s speed with PC5-48000 bandwidth for fast data throughput
  • Registered ECC RDIMM design with on-die ECC for data integrity under load
  • CL32 32-38-38 timings at 1.35 V for low-latency, efficient operation
  • Intel XMP 3.0 profile support for automatic overclock configuration

256 GB DDR5-6000 Registered ECC Kit

This 256 GB kit contains eight 32 GB DDR5-6000 RDIMMs built for Intel and AMD workstations that require registered ECC memory. It targets creators, engineers and data-science professionals who need high throughput with error correction.

288-Pin RDIMM Installation Notes

Each module uses the standard 288-pin DDR5 RDIMM form factor and runs at 1.35 V with Intel XMP 3.0 profiles for automatic configuration. Registered buffering adds electrical load on the memory controller, so the platform must explicitly support RDIMMs; consumer desktop boards that accept only unbuffered DIMMs will not work.

Sustained Load Behaviour

The CL32 32-38-38 timings at 6000 MHz deliver consistent bandwidth for long rendering, simulation or compilation runs. On-die ECC corrects single-bit errors while the module-level ECC handles multi-bit errors, preventing data corruption during extended heavy workloads.

Kohokohdat

  • 256 GB total capacity across eight 32 GB modules for high-density server workloads
  • DDR5 6000 MT/s speed with PC5-48000 bandwidth for fast data throughput
  • Registered ECC RDIMM design with on-die ECC for data integrity under load
  • CL32 32-38-38 timings at 1.35 V for low-latency, efficient operation
  • Intel XMP 3.0 profile support for automatic overclock configuration

Tekniset tiedot

BrandKingston
SeriesFURY Renegade Pro
ModelKF560R32RBK8-256
Capacity256GB (8 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6000 (PC5 48000)
CAS LatencyCL32
Timing32-38-38
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
BIOS/Performance ProfileIntel XMP 3.0
Heat SpreaderYes
Lähetyspaino0.18 kg
Pakkauksen mitat169 × 105 × 38 mm

Kysymyksiä tästä tuotteesta

How can I confirm the kit is running at 6000 MHz with CL32 timings after installation?

Enable the Intel XMP 3.0 profile in the BIOS, then verify the operating frequency shows 6000 MT/s and the timings read 32-38-38 in CPU-Z or your platform monitoring tool.

What exactly is included in the package and is any additional hardware required?

The box contains eight 32 GB DDR5 RDIMM modules with pre-attached heat spreaders, totalling 256 GB; no extra components are needed for installation.

Why choose the 256 GB kit with eight 32 GB modules instead of a different capacity?

This configuration provides 256 GB total capacity using eight single-rank 32 GB modules, delivering 6000 MHz speed with CL32 latency and registered ECC for workloads that need maximum registered memory density.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.