Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 288-pin DDR4 server memory module with black chips, no heat spreader

Kingston Technology Corp.

Kingston Technology Corp. KSM29RS8/8HDR 8GB DDR4 2933 ECC Registered server RAM

SKU CH-1J1G-X96X2 MPN KSM29RS8/8HDR

8GB DDR4 2933 ECC registered server memory with CL21 timing for mission-critical uptime

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Timing21-21-21
  • Voltage1.20V
  • ECC Registered design protects data integrity in mission-critical servers
  • DDR4 2933 speed delivers 23400 bandwidth for demanding workloads
  • CL21 21-21-21 timings optimise latency for responsive performance
  • 20V operation reduces power draw and thermal load
  • Dynamic burn-in testing screens defects before shipment

8GB DDR4 2933 ECC Registered Module

This 8GB DDR4 module runs at 2933 MT/s with CL21 timings and 1.20V voltage. It uses a 288-pin registered design with ECC for error correction. The single-rank 1Rx8 organisation suits server platforms that require registered memory.

Suited for servers needing registered ECC DIMMs

The module fits systems that specifically call for registered DDR4 with ECC. It is not for desktops or workstations that only accept unbuffered non-ECC memory. Buyers who need higher capacities per slot or lower latencies should look at other configurations.

Verify motherboard supports registered ECC DDR4

Check that your server board lists registered ECC DDR4 2933 support in its qualified vendor list. Confirm the number of available 288-pin slots and the maximum memory per channel. Ensure the system BIOS is current for full compatibility.

Kohokohdat

  • ECC Registered design protects data integrity in mission-critical servers
  • DDR4 2933 speed delivers 23400 bandwidth for demanding workloads
  • CL21 21-21-21 timings optimise latency for responsive performance
  • 20V operation reduces power draw and thermal load
  • Dynamic burn-in testing screens defects before shipment

Tekniset tiedot

BrandKingston
SeriesPremier Series
ModelKSM29RS8/8HDR
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Timing21-21-21
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
Heat SpreaderNo
Lähetyspaino0.14 kg
Pakkauksen mitat178 × 76 × 13 mm

Kysymyksiä tästä tuotteesta

Does my server need a 288-pin DDR4 slot that supports registered ECC modules?

Yes, this 8 GB stick is a 288-pin DDR4 2933 registered ECC DIMM, so the motherboard must accept registered ECC memory in a standard DDR4 slot.

Can I mix this CL21 2933 MT/s module with slower DDR4 ECC registered DIMMs already in the system?

The server will run all installed modules at the speed and timings of the slowest DIMM, so this stick will downclock to match your existing memory.

How do I confirm the module is running at 2933 MT/s with CL21 timings after installation?

Check the BIOS memory information or a tool such as dmidecode; it should report DDR4-2933, PC4-23400, CAS latency 21 and registered ECC operation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.