Kingston Technology Corp. KSM32RD8/32HC 32GB DDR4 3200 CL22 ECC Registered 2Rx8 288-pin server RAM
- 32GB
- 288-Pin DDR4 SDRAM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Kingston Technology Corp.
32 GB DDR4 ECC registered server memory running at 3200 MHz with CL22 latency
Option Samsung, DRAM Lock
This 32 GB DDR4 module operates at 3200 MHz with CL22 latency and 1.20 V power draw. It uses a 288-pin DIMM form factor and includes on-die ECC with registered signal processing. The dual-rank 2Rx8 organisation suits multi-socket server boards that require registered memory.
Registered buffering reduces electrical load on the memory controller, allowing stable operation when all DIMM slots are populated. Dual-rank 2Rx8 organisation keeps both ranks active during extended compute passes, while ECC corrects single-bit errors without halting the pipeline. CL22 timing at 3200 MHz delivers consistent bandwidth for virtualisation and database tasks.
Each stick provides 32 GB, so total system memory scales in 32 GB increments per populated slot. Boards that only support unbuffered UDIMMs or that limit registered DIMMs to lower densities will not accept this module. Verify the platform memory-qualified-vendor list before purchase.
| Brand | Kingston |
|---|---|
| Model | KSM32RD8/32SB |
| Capacity | 32GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL22 |
| Timing | 22-22-22 |
| Voltage | 1.20V |
| ECC | Yes |
| Rank | 2Rx8 |
| Lähetyspaino | 0.09 kg |
| Pakkauksen mitat | 165 × 51 × 8 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The module operates at the standard DDR4 voltage of 1.20 V. Actual power draw depends on workload and the server platform it is installed in.
The board must provide 288-pin DDR4 slots that support ECC and registered memory. Consumer desktop boards typically lack this support.
If the platform supports mixed speeds, all modules will run at the lowest common speed and timings. The module itself is rated for 3200 MHz CL22.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?