Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

Kingston Technology Corp.

Kingston Technology Corp. KTL-TS548E-16G 16GB DDR5-4800 CL40 ECC Unbuffered 288-pin server RAM

SKU CH-8R98-DXYHW MPN KTL-TS548E-16G

16 GB DDR5 ECC unbuffered DIMM running at 4800 MHz with CL40 latency for workstation stability

  • Capacity16GB
  • Type288-Pin DDR5 SDRAM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • ECC protection prevents data corruption in critical workloads
  • 4800 MHz DDR5 speed handles demanding applications smoothly
  • 10 V operation reduces power draw and heat
  • Single-rank 1Rx8 layout improves memory controller efficiency
  • 288-pin DIMM fits standard server motherboard slots

16 GB DDR5-4800 ECC Unbuffered Server Memory

This 16 GB DDR5-4800 module targets workstations and entry-level servers that require error-correcting code memory without registered buffering. It suits administrators who need single-rank density for straightforward population rules and 1.10 V operation for standard platform compatibility.

Sustained Load Behaviour at CL40 4800 MT/s

The CL40 latency and 4800 MT/s data rate deliver predictable bandwidth for long-running workloads such as rendering, compilation or virtualisation hosting. Single-rank organisation avoids the command-scheduling overhead of dual-rank modules, so throughput remains steady during extended memory-bound tasks.

288-Pin DIMM Installation Notes

The 288-pin DIMM fits any DDR5 UDIMM slot keyed for unbuffered ECC; no heat spreader means clearance is minimal but verify motherboard support for unbuffered ECC before purchase. Builders who need registered RDIMM or higher capacities per slot should look elsewhere.

Kohokohdat

  • ECC protection prevents data corruption in critical workloads
  • 4800 MHz DDR5 speed handles demanding applications smoothly
  • 10 V operation reduces power draw and heat
  • Single-rank 1Rx8 layout improves memory controller efficiency
  • 288-pin DIMM fits standard server motherboard slots

Tekniset tiedot

BrandKingston
ModelKTL-TS548E-16G
Capacity16GB
Type288-Pin DDR5 SDRAM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Lähetyspaino0.05 kg
Pakkauksen mitat25 × 25 × 25 mm

Kysymyksiä tästä tuotteesta

How much power does the 1.10 V DDR5 module draw when the server runs continuously?

The module operates at the standard DDR5 voltage of 1.10 V. Actual power draw depends on workload and the platform's memory controller; the kit itself has no separate power rating.

What motherboard slot and memory controller are required for this 288-pin DDR5 DIMM?

You need a workstation or server board with a 288-pin DDR5 DIMM slot and a CPU memory controller that supports DDR5-4800 unbuffered ECC memory.

Can this single-rank 1Rx8 ECC stick share channels with other DDR5 modules of different capacities?

Yes, provided the platform supports mixed-capacity DDR5 populations and all modules run at a common speed and voltage; the memory controller will negotiate the lowest common timing.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.