NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Kingston Technology Corp.
16 GB DDR3L ECC registered DIMM at 1600 MHz with CL11 latency and 1.35 V operation
This 16GB DDR3 ECC Registered DIMM targets servers and workstations that require error-correcting memory. The registered buffer reduces electrical load on the memory controller, allowing larger capacities per channel. It operates at DDR3 1600 with a CAS latency of 11.
The module fits standard 240-pin DDR3 slots and runs at 1.35V, lower than classic DDR3 voltage. Systems must support DDR3L and registered ECC DIMMs for correct operation. Using it in consumer boards without registered support will prevent boot.
The 1.35V operating voltage reduces power draw and heat output compared to 1.5V DDR3 modules. This helps maintain lower temperatures in dense server configurations. No active cooling is required on the DIMM itself under normal airflow.
| Brand | Kingston |
|---|---|
| Series | ValueRAM |
| Model | KVR16LR11D4/16KF |
| Capacity | 16GB |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Lähetyspaino | 0.04 kg |
| Pakkauksen mitat | 146 × 46 × 8 mm |
The module operates at DDR3 1600 (PC3 12800) with CL11 latency, so sustained bandwidth is capped by the 1600 MT/s data rate and the registered buffer adds one cycle of latency.
At 1.35 V the DDR3L module draws less power and generates less heat than standard 1.5 V DDR3, while the registered design reduces electrical load on the memory controller.
The motherboard must provide 240-pin DDR3 slots that accept ECC registered DIMMs and run at 1.35 V; consumer boards without registered support will not work.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?