Kingston Technology Corp. KVR24N17S8/8 8GB DDR4 2400 CL17 desktop RAM
- 8GB
- DDR4 2400 (PC4 1920…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Kingston Technology Corp.
16 GB DDR4 2400 desktop memory module with CL17 timing and 1.20 V operation
Capacity 16GB
This is a single 16GB DDR4 desktop module built to the 288-pin DIMM standard. It runs at 2400 MT/s with CL17 timings at 1.20V. The stick is unbuffered, non-ECC and carries no heat spreader, matching the ValueRAM series focus on standard JEDEC operation.
The module suits owners of desktop boards that accept DDR4 2400 unbuffered memory and who need a straightforward 16GB upgrade. Builders requiring ECC error correction, registered buffering, lower CAS latency or speeds above 2400 should look at other lines.
The 2400 MT/s JEDEC speed rating is the figure that determines whether this part matches the motherboard's supported memory standard. If the platform calls for a higher or lower base speed, this module will not run at its rated specification.
| Brand | Kingston |
|---|---|
| Series | ValueRAM |
| Model | KVR24N17D8/16 |
| Capacity | 16GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Timing | 17-17-17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | Non-ECC Unbuffered 100% Factory Tested at Speed Designed to meet JEDEC Free Technical Support |
| Lähetyspaino | 0.03 kg |
| Pakkauksen mitat | 160 × 74 × 9 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The module runs at 2400 MT/s with a CL17 latency and 1.20 V, matching the JEDEC PC4-19200 standard for desktop memory.
It uses a standard 288-pin DIMM form factor, so it installs in any desktop DDR4 DIMM slot without a heat spreader or extra clearance.
Align the notch with the slot key, press down firmly until both side clips snap shut, then verify in BIOS that the 16 GB capacity and 2400 speed are detected.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?