Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
A spool of 3.0mm soft PLA filament in natural finish

Lay Filaments

Lay Filaments PLA-Y-SOFT 3D Printer Filament 3.0mm .75kg

SKU CH-F28Z-RGTPE

Soft PLA filament with low warp on a cold bed, printing at 225-240°C in 3.0mm diameter on a .75kg spool

  • Soft PLA prints easily on a cold bed with low warp
  • Printing temperature range of 225 to 240 degC suits many printers
  • 0 mm diameter fits compatible extruders directly
  • .75 kg spool provides ample material for multiple projects
  • High bioplastic content makes the filament renewable and biodegradable

Filament for standard 3D printing

This Lay Filaments PLA-Y-Soft spool supplies .75 kg of 3.0 mm polylactic acid filament. The material prints at moderate temperatures and is suited to everyday prototyping and hobby projects. Its high bioplastic content makes it a renewable, biodegradable choice for general use.

Users needing cold-bed reliability

The filament is designed for low warp on an unheated bed, helping beginners and printers without heated platforms achieve consistent first layers. It is less suitable for applications that demand high-temperature resistance or mechanical strength beyond standard PLA capabilities.

Printing temperature range 225-240 degC

Extrusion should be set between 225 and 240 degC for reliable flow and layer adhesion. Staying inside this window is the primary factor that determines whether the filament will perform as expected on a given printer.

Kohokohdat

  • Soft PLA prints easily on a cold bed with low warp
  • Printing temperature range of 225 to 240 degC suits many printers
  • 0 mm diameter fits compatible extruders directly
  • .75 kg spool provides ample material for multiple projects
  • High bioplastic content makes the filament renewable and biodegradable

Tekniset tiedot

BrandLay Filaments

Kysymyksiä tästä tuotteesta

Will this 3.0mm soft PLA feed reliably through my older Bowden extruder without jamming?

The 3.0mm diameter matches printers designed for thicker filament, and the soft PLA formulation reduces stiffness so it follows Bowden tubes with less friction and fewer snags.

How can I confirm the filament is extruding correctly at the 225-240°C range on my printer?

Run a temperature tower from 225°C to 240°C; look for consistent layer adhesion, minimal stringing, and a smooth surface finish at the temperature that prints cleanest.

Does the 0.75kg spool include a desiccant pack or resealable bag for moisture protection?

The spool is supplied as filament only; a resealable bag and desiccant are not included and should be purchased separately for storage.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.