Lexar
Lexar Professional NM1090 PRO 2TB PCIe 5.0 NVMe M.2 2280 internal SSD
PCIe 5.0 internal SSD delivering 14,000 MB/s reads, 13,000 MB/s writes and 2 TB capacity for demanding workloads
- Sequential reads up to 14,000 MB/s slash load times
- 2 TB capacity holds large game libraries and media
- 1,400 TBW and 1,500,000 h MTBF ensure long-term data integrity
- Random reads up to 2,100K IOPS accelerate multitasking workflows
- 6 nm controller runs 36 % cooler under heavy loads
Lexar Professional NM1090 PRO 2TB PCIe 5.0 NVMe SSD
The Lexar Professional NM1090 PRO is a 2TB internal solid-state drive built on the PCIe 5.0 x4 interface and NVMe protocol. It targets creative professionals, high-end gamers and workstation users who need sustained throughput for large project files and demanding game libraries.
2TB capacity with 1400 TBW endurance
Sequential reads reach 14,000 MB/s and writes 13,000 MB/s, while random performance hits 2100K IOPs read and 1800K IOPs write. The 2TB volume handles extensive media libraries and heavy multitasking, though workloads exceeding the rated write endurance or sustained thermal limits will throttle performance.
6nm controller, 232-layer 3D TLC NAND
The 6nm controller runs 36% cooler at peak load than 12nm alternatives, reducing the need for aggressive motherboard heatsinks. Lexar DiskMaster software provides firmware updates, secure erase and health monitoring. The standard M.2 2280 keying fits most modern desktop and laptop slots, but systems without PCIe 5.0 support will operate at lower speeds.
Kohokohdat
- Sequential reads up to 14,000 MB/s slash load times
- 2 TB capacity holds large game libraries and media
- 1,400 TBW and 1,500,000 h MTBF ensure long-term data integrity
- Random reads up to 2,100K IOPS accelerate multitasking workflows
- 6 nm controller runs 36 % cooler under heavy loads
Tekniset tiedot
Tälle tuotteelle ei ole vielä julkaistu teknisiä tietoja.
Kysymyksiä tästä tuotteesta
Will this drive fit a standard M.2 2280 slot on a desktop motherboard?
Yes, the 2280 form factor matches the common M.2 slot length used by most desktop boards.
Does the PCIe 5.0 interface require a specific motherboard chipset to reach the quoted speeds?
A PCIe 5.0-capable CPU and chipset are needed to achieve the 14,000 MB/s read and 13,000 MB/s write figures.
Is any additional cooling needed for sustained workloads?
The 6nm controller runs 36% cooler at peak load than a 12nm design, but a motherboard heatsink is still recommended for heavy use.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
