Lian Li SUP01W White ATX Mid Tower PC Case
- 3
- Side 1: 3 x 120mm S…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Lian Li
An ATX mid-tower case holding Micro-ATX, ATX or Mini-ITX boards with a 400 mm GPU limit and 88.2 mm CPU cooler height
Options Black
The Lian Li SUP01X is a 45L ATX mid-tower that stands vertically to reduce desk footprint. It accepts ATX, Micro-ATX and Mini-ITX motherboards plus ATX back-connect boards. A tempered-glass side panel shows the internal layout while steel construction provides rigidity.
Three 120mm daisy-chained fans come fitted and a 510mm PCIe 4.0 riser cable with an aRGB-lit bracket is pre-mounted. Dust filters cover bottom, front and top intakes. The riser enables vertical GPU mounting for cleaner cable routing and lighting visibility.
Four 2.5in SSD bays and two 3.5in HDD bays provide internal drive capacity. A side-mounted radiator up to 360mm or 280mm is supported for liquid cooling. Graphics cards up to 400mm fit, while CPU cooler height is capped at 88.2mm.
| Brand | LIAN LI |
|---|---|
| Series | O11 SUP01 |
| Model | SUP01X |
| Part Number | O11 SUP01 |
| Type | ATX / Micro ATX Mid Tower |
| Color | Black |
| Case Material | Steel / Tempered Glass |
| With Power Supply | No |
| Power Supply Mounted | Bottom |
| Motherboard Compatibility | Micro ATX / ATX / Mini-ITX |
| Side Panel | with Side Window |
| Dust Filters | Bottom / Front / Top |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 4 |
| Expansion Slots | 7 (for low profile card) 4 (for standard profile card with extension cable) |
| Fan Options | Side 1: 3 x 120mm Side 2: 3 x 120mm or 2 x 140mm Rear exterior: 1x 120mm |
| Radiator Options | Side 2: 360mm or 280mm |
| 120mm Fans | 3 |
| Max GPU Length | 400 mm |
| Max CPU Cooler Height | Max 88.2mm |
| Max PSU Length | 220 mm |
| Dimensions | (H) 534mm x (W) 212mm x (D) 403.45mm |
| Lähetyspaino | 4.76 kg |
| Pakkauksen mitat | 625 × 528 × 287 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The three daisy-chained 120mm fans are pre-installed and can be swapped with standard 120mm or 140mm units using the side mounts if airflow needs change.
The CPU cooler height is capped at 88.2mm, so taller tower coolers cannot fit and liquid-cooler radiator size becomes the practical ceiling.
Three included 120mm fans pull air through the front mesh and exhaust out the side, while a 360mm or 280mm side radiator handles CPU heat without recirculation.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?