Lian Li UNI FAN TL LCD Flex 120mm Normal Blade White 1.8-inch 400x400 60Hz
- 1 Fan
- No Controller
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Lian Li
Three 120 mm reverse-blade fans deliver 83.4 CFM airflow and 2.66 mmH₂O static pressure at up to 2300 RPM with ARGB lighting and an included controller
Color White
Model LED Reverse Blade
Option TL FLEX 120 - 3 Pack with Controller
This set includes three 120 mm case fans with reverse-blade design and ARGB lighting in a white finish. A controller is supplied in the box for unified management. The fans use FDB bearings with copper shielding for stable operation up to 2300 RPM. They deliver 83.4 CFM airflow and 2.66 mmH2O static pressure through LCP blades with a 0.6 mm gap.
The Flex receiver platform supports PWM, 5V 3-pin ARGB motherboard control, L-Connect 3 software and wireless L-Wireless adjustment. Users who prefer a simpler fixed-cable installation without the extra receiver flexibility should consider a standard UNI FAN model. The pack is intended for case cooling configurations that accept 120 mm mounting points.
These two figures define the cooling capability of each fan in the pack. The 0.6 mm blade-to-frame gap and LCP blades are engineered to reach this airflow and static pressure at the 2300 RPM ceiling. If your build requires higher or lower performance targets, a different fan specification will be necessary.
| Brand | Lian li |
|---|---|
| Model | 12RTL1F3W |
| Fan Counts | 3 Fans |
| Fan Controller | Controller |
| Type | Case Fan |
| Compatibility | Case |
| Fan Size | 120 mm |
| Color | White |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Mount each 120 mm fan with the blade side facing the intended exhaust direction; the reverse-blade design pushes air toward the motor side. Fully insert and lock the FLEX receiver into the controller — improper contact causes connection issues.
The fluid-dynamic bearings are sealed and rated for continuous operation up to 2300 RPM; no re-lubrication is required. Keep the 0.6 mm blade-to-frame gap clear of dust buildup to maintain the 83.4 CFM airflow and 2.66 mmH₂O static pressure.
The 2.66 mmH₂O static pressure is the maximum the fans can generate; in dense radiator or filter stacks this limit appears first, reducing the 83.4 CFM airflow before motor temperature becomes a factor.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?