Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
3.5 inch resistive touch display board with IPS screen and microSD slot

LORDWORLD

LORDWORLD 3.5inch Touch Display 480×320 65K Colors IPS Resistive XPT2046 ILI9488 SPI development board

SKU CH-HS53-P0TST

A 3.5 inch IPS touch display for Raspberry Pi Pico with 480×320 resolution, 65K colours, XPT2046 controller, ILI9488 driver, SPI bus, MicroSD slot and programmable backlight

  • 5 inch IPS screen shows 65K colours at 480×320 resolution
  • Dedicated XPT2046 controller gives smoother touch response than AD alternatives
  • MicroSD slot stores images for direct display without extra hardware
  • Programmable backlight control reduces power draw when full brightness is not needed
  • C/C++ and MicroPython examples included for faster Raspberry Pi Pico development

Pico Touch Display Module

The LORDWORLD 3.5inch Touch Display is a development board designed for the Raspberry Pi Pico mini board. It provides a 480×320 resolution IPS panel with 65K colors for clear visual output. A dedicated XPT2046 resistive touch controller handles input, while an onboard MicroSD card slot allows direct image storage and display. Programmable backlight control supports power-saving operation for portable projects.

Makers Building Pico Handheld Interfaces

This module suits developers creating custom GUIs, portable data loggers, or compact control panels using C/C++ or MicroPython. Builders who need capacitive multi-touch, higher colour depth, or a larger viewing area should look at alternative display technologies. Projects requiring a different host platform or a parallel interface will also need a different solution.

SPI Bus and ILI9488 Driver

The display communicates over an SPI bus using the ILI9488 driver IC, which determines wiring, library support and refresh performance. Verify that your Pico firmware can drive this specific controller before purchase. The SPI interface and driver combination is the single specification that decides integration compatibility.

Kohokohdat

  • 5 inch IPS screen shows 65K colours at 480×320 resolution
  • Dedicated XPT2046 controller gives smoother touch response than AD alternatives
  • MicroSD slot stores images for direct display without extra hardware
  • Programmable backlight control reduces power draw when full brightness is not needed
  • C/C++ and MicroPython examples included for faster Raspberry Pi Pico development

Tekniset tiedot

BrandLORDWORLD

Kysymyksiä tästä tuotteesta

How do I verify the 3.5 inch IPS panel is working after wiring it to my Raspberry Pi Pico?

Run the included C/C++ or MicroPython example; the screen should light up showing 480×320 graphics in 65K colours and the resistive layer should register touches via the XPT2046 controller.

What comes in the package and what must I supply myself?

The board ships with the ILI9488-driven display, XPT2046 touch controller and microSD slot; you provide a Raspberry Pi Pico, jumper wires and a microSD card if you want image storage.

Which display variant should I pick for a Pico project needing colour graphics and touch?

This single 3.5 inch 480×320 IPS model with 65K colours, SPI interface, ILI9488 driver and XPT2046 resistive touch is the only version offered.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.