Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Five-inch HDMI touchscreen with toughened glass panel and wide bezel

LORDWORLD

LORDWORLD 5 Inch HDMI Touchscreen 1024x600 800cd/m² IPS Capacitive Touch 178°

SKU CH-VDPM-895SP

A 5 inch HDMI touchscreen with 1024×600 IPS panel, 800 cd/m² brightness and 178° viewing angle for Raspberry Pi, Jetson boards or Windows PCs

  • Bright 800 cd/m² screen stays readable outdoors
  • 1024×600 IPS panel gives 178° viewing angles
  • 5-point capacitive touch works without extra drivers
  • HDMI input fits Raspberry Pi and Jetson boards
  • Compatible with Windows 11, 10, 8.1, 8, 7

5 Inch HDMI Touchscreen for Edge Devices

This 5 inch HDMI touchscreen delivers 1024×600 pixels at 800cd/m² brightness with an IPS panel and 178° viewing angle. It targets makers and developers building Raspberry Pi, Jetson Nano or Windows-based edge projects that need a compact, high-visibility display with capacitive touch.

Driver-Free Setup Across Platforms

The monitor works with Raspberry Pi boards, Jetson Nano, TX2, Xavier NX and Orin series devices plus Windows 11, 10, 8.1, 8 and 7 without installing drivers. Capacitive touch supports 5-point and single-point input. The main friction point is ensuring the host device supplies enough USB current for the backlight and touch controller simultaneously.

Sustained Brightness in Continuous Operation

The 800cd/m² backlight maintains output during long runs, making the screen readable in bright ambient conditions. IPS technology keeps colour and contrast stable at wide angles over extended periods. The integrated structure helps dissipate heat from the panel and touch layer during continuous use.

Kohokohdat

  • Bright 800 cd/m² screen stays readable outdoors
  • 1024×600 IPS panel gives 178° viewing angles
  • 5-point capacitive touch works without extra drivers
  • HDMI input fits Raspberry Pi and Jetson boards
  • Compatible with Windows 11, 10, 8.1, 8, 7

Tekniset tiedot

BrandLORDWORLD

Kysymyksiä tästä tuotteesta

How can I confirm the 5 inch HDMI touchscreen is operating correctly after connecting it to my Raspberry Pi?

The display should show a 1024x600 image at up to 800cd/m² brightness with 178° viewing angles, and the 5-point capacitive touch should respond immediately without installing any driver on Raspberry Pi OS or Windows 11, 10, 8.1, 8 or 7

What items are included with the 5 inch HDMI touchscreen and what must I purchase separately?

The unit is an integrated 5 inch IPS panel with toughened glass, HDMI input and USB touch interface; you will need to supply your own HDMI cable, USB cable for touch data and a 5 V power source for the host board

Which version of the 5 inch HDMI touchscreen should I choose for a Jetson Nano versus a standard PC?

The same model supports Jetson Nano, TX2, Xavier NX, Orin series, all Raspberry Pi versions and Windows 11 down to 7 with driver-free 5-point or single-point touch, so no separate version is required

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.