Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
5 inch HDMI touchscreen with wide bezel and toughened glass

LORDWORLD

LORDWORLD 5 inch HDMI Touchscreen 1024x600 IPS 800cd/m² Toughened Glass Wide-Bezel Capacitive Touch

SKU CH-375Q-S7YJ1

A 5-inch IPS touchscreen with 1024×600 resolution, 800 cd/m² brightness and 178° viewing angles, driver-free on Raspberry Pi, Jetson boards and Windows 7 to 11

  • Bright outdoor viewing with 800 cd/m² peak brightness
  • Sharp 1024×600 IPS panel with 178° wide viewing angles
  • Driver-free 5-point capacitive touch on Windows 11/10/8.1/8/7
  • Ready for Raspberry Pi, Jetson Nano and PC via HDMI
  • Toughened glass surface protects the display in daily use

5 inch HDMI touchscreen for edge devices

This five inch HDMI touchscreen delivers 1024 by 600 pixel resolution on an IPS panel rated at 800 candelas per square metre. It targets makers and engineers who need a compact, high-brightness display for Raspberry Pi boards, Jetson Nano, TX2, Xavier NX or Orin series modules, and standard Windows PCs.

Toughened glass panel with wide bezel mounting

The integrated structure uses toughened glass over a capacitive layer that recognises five simultaneous touch points or single-point input without extra drivers. Its wide bezel provides a stable mounting surface for enclosures or brackets, while the 178 degree viewing angle keeps colours consistent from almost any position.

Upgrades headless or low-resolution setups

Replaces headless operation or smaller low-brightness screens when a bright, touch-enabled monitor is required for on-device debugging, kiosk interfaces or portable test rigs. The jump is worth it when you need driver-free Windows 7 through 11 support plus direct compatibility with every Raspberry Pi revision and the listed Jetson platforms.

Kohokohdat

  • Bright outdoor viewing with 800 cd/m² peak brightness
  • Sharp 1024×600 IPS panel with 178° wide viewing angles
  • Driver-free 5-point capacitive touch on Windows 11/10/8.1/8/7
  • Ready for Raspberry Pi, Jetson Nano and PC via HDMI
  • Toughened glass surface protects the display in daily use

Tekniset tiedot

BrandLORDWORLD

Kysymyksiä tästä tuotteesta

What resolution does the HDMI interface support on this 5 inch display?

The HDMI input drives the panel at 1024×600 pixels, so that is the native resolution you will see on the 5 inch screen.

What physical space and mounting points does the wide-bezel panel need?

The integrated structure includes a wide bezel around the 5 inch IPS panel; allow enough clearance for the bezel dimensions and use the mounting holes on the board edges to secure it.

How do I enable touch on a Raspberry Pi, and what step is often missed?

Connect the HDMI cable for video and the USB cable for touch power, then ensure the Pi config enables the USB touch interface; skipping the USB connection is the common mistake.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.