Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Seven inch capacitive touch LCD development board with HDMI input

LORDWORLD

LORDWORLD 7inch 800x480 Capacitive Touch HDMI LCD development board

SKU CH-62B4-EE9M5

A 7-inch 800x480 capacitive touch display with HDMI input for Raspberry Pi, Banana Pi and BeagleBone Black, plus general PC monitor use

  • 800×480 resolution gives sharp visuals for embedded projects
  • Capacitive touch enables direct finger input without a stylus
  • Works with Raspberry Pi using supplied Raspbian images
  • Compatible with Banana Pi and BeagleBone Black via provided OS images
  • Functions as a standard HDMI monitor for any computer

7-inch Capacitive Touch LCD for Raspberry Pi

This 7-inch development board delivers an 800x480 capacitive touch display designed to fit Raspberry Pi single-board computers. It also supports Banana Pi, Banana Pro and BeagleBone Black with ready-made system images. The panel doubles as a general-purpose HDMI monitor for other hosts.

Sustained Operation on Embedded Boards

The display draws power and video over HDMI, so thermal load matches the host board rather than adding its own heat source. Continuous touch input and video playback remain stable as long as the host maintains adequate power delivery and cooling. No active cooling is integrated on the LCD itself.

Installation Notes and Common Issues

Connection uses standard HDMI and USB for touch, making physical hook-up straightforward on supported boards. Pre-built Raspbian, Lubuntu and Angstrom images enable touch without extra driver work on those platforms. For other mini-PCs the supplier states that a driver must be developed by the user, which is the main integration hurdle. The panel lacks mounting hardware, so a custom bracket or case is usually required.

Kohokohdat

  • 800×480 resolution gives sharp visuals for embedded projects
  • Capacitive touch enables direct finger input without a stylus
  • Works with Raspberry Pi using supplied Raspbian images
  • Compatible with Banana Pi and BeagleBone Black via provided OS images
  • Functions as a standard HDMI monitor for any computer

Tekniset tiedot

BrandLORDWORLD

Kysymyksiä tästä tuotteesta

How much heat or noise does the 7 inch 800x480 touch screen produce when it runs all day?

The LCD has no fan or moving parts, so it stays silent and only adds the modest warmth of its backlight to the host board.

Which cables and host board must I already own to use the capacitive touch panel?

You need a Raspberry Pi, BeagleBone Black or Banana Pi with an HDMI output and a spare USB port for the touch interface, plus the matching HDMI and USB cables.

Will the 800x480 display work alongside an older Raspberry Pi 2 or original BeagleBone Black I already keep?

Yes, the screen accepts standard HDMI video and USB touch from those boards; the supplier provides ready-made Raspbian and Angstrom images for them.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.