Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
LORDWORLD 8 inch capacitive touch display panel with OV5647 5MP front camera

LORDWORLD

LORDWORLD 8inch Capacitive Touch Display Panel DSI OV5647 5MP Front Camera 800×480 development board

SKU CH-6CN9-K9J69

8-inch capacitive touch panel with 800×480 resolution, DSI interface, OV5647 5 MP camera and pogo-pin power for clean Raspberry Pi integration

  • 5MP OV5647 camera captures 2592×1944 images with 72.9° field of view
  • Capacitive touch on 800×480 panel enables direct interaction for IoT projects
  • Anti-interference FFC cable design maintains stable display in industrial environments
  • Pogo-pin power plus dual 5V headers run fans or peripherals without extra wiring
  • SMD nuts and large front panel simplify integration into custom enclosures

8-inch DSI touch panel with OV5647 camera

This development board combines an 800×480 capacitive display with an OV5647 5MP front camera offering 2592×1944 still resolution and a 72.9° diagonal field of view. It targets Raspberry Pi makers who need integrated visual output and capture in a single module. The large front panel simplifies custom enclosure design.

DSI interface with pogo-pin power and 5V headers

The board connects through the Raspberry Pi DSI port and draws power via pogo pins, removing the need for separate wiring looms. Two 5V output headers are provided to drive a cooling fan or other low-power peripherals directly from the panel. SMD nuts give secure mounting points for compact integration.

Anti-interference FFC cable

An LCD FFC cable with anti-interference design maintains signal integrity during extended industrial use. VCOM voltage adjustment lets you optimise display quality over long sessions, reducing drift that can appear after continuous operation. The fixed 800×480 panel resolution and camera specs define the sustained throughput ceiling.

Kohokohdat

  • 5MP OV5647 camera captures 2592×1944 images with 72.9° field of view
  • Capacitive touch on 800×480 panel enables direct interaction for IoT projects
  • Anti-interference FFC cable design maintains stable display in industrial environments
  • Pogo-pin power plus dual 5V headers run fans or peripherals without extra wiring
  • SMD nuts and large front panel simplify integration into custom enclosures

Tekniset tiedot

BrandLORDWORLD

Kysymyksiä tästä tuotteesta

What limits the OV5647 5MP camera frame rate under sustained use?

The camera captures up to 2592×1944 resolution, but sustained frame rate depends on the host Raspberry Pi board's CSI bandwidth and thermal throttling.

How much heat or noise does the display panel generate when running all day?

The panel itself has no fan; heat comes from the attached Raspberry Pi and any device powered from the 5 V output headers, so noise and temperature vary with that board and load.

Which Raspberry Pi boards and cables are required for the DSI display and OV5647 camera to work?

Any Raspberry Pi with a DSI display port and a CSI camera connector, plus the matching DSI FFC cable and CSI ribbon cable, are needed to drive the 800×480 panel and 5 MP camera.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.