Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Round 1.85 inch touch display board with 360 by 360 colour screen

LORDWORLD

LORDWORLD ESP32-S3 1.85" Round Touch Development Board 360×360 262K Color

SKU CH-VE2Y-6P4F3

Round 1.85" IPS touch display with 360×360 resolution and 262K colours, driven by an ESP32-S3 dual-core processor with Wi-Fi and Bluetooth for IoT projects

  • Round 1.85-inch IPS display with 360×360 resolution and 262K colour depth
  • ESP32-S3 32-bit LX7 dual-core processor handles Wi-Fi and Bluetooth workloads
  • Capacitive touch driven by ST77916 controller with interrupt support for responsive UI
  • QSPI-integrated display simplifies wiring and speeds up graphics transfer
  • GPIO and I2C headers enable flexible peripheral expansion for IoT prototypes

Round Touch Display Board

This LORDWORLD development board integrates a 1.85 inch round IPS LCD with a 360 by 360 resolution and 262K colour depth. A 32 bit LX7 dual core ESP32-S3 processor drives the display through a QSPI interface and provides WiFi and Bluetooth connectivity. The ST77916 controller manages the panel and supports wide viewing angles for clear visibility.

Check Power And Peripheral Needs

Verify that your power source can supply the board through its USB connector before ordering. Confirm which GPIO and I2C pins your project requires because the board exposes these interfaces for sensor or actuator expansion. The capacitive touch layer operates over I2C with interrupt support so ensure your firmware can handle that interrupt line.

Upgrade From Rectangular Non Touch Modules

This board replaces rectangular development modules that lack an integrated round display and touch input. The jump is worth it when your project needs a compact circular UI with 262K colour output and built in wireless connectivity. It is not suited for buyers who need a larger screen area or a display without touch capability.

Kohokohdat

  • Round 1.85-inch IPS display with 360×360 resolution and 262K colour depth
  • ESP32-S3 32-bit LX7 dual-core processor handles Wi-Fi and Bluetooth workloads
  • Capacitive touch driven by ST77916 controller with interrupt support for responsive UI
  • QSPI-integrated display simplifies wiring and speeds up graphics transfer
  • GPIO and I2C headers enable flexible peripheral expansion for IoT prototypes

Tekniset tiedot

BrandLORDWORLD

Kysymyksiä tästä tuotteesta

What comes in the box with the LORDWORLD ESP32-S3 board and what must be purchased separately?

The board ships as a single unit with the 1.85 inch round touch display, ESP32-S3 processor and ST77916 controller integrated. Power supply, cables, sensors or enclosure are not included and must be sourced separately.

Which display variant should I choose for this development board?

This model provides a fixed 1.85 inch IPS panel with 360×360 resolution and 262K colour depth. No alternative screen sizes, resolutions or colour options are offered for this board.

What does the 360×360 resolution mean when the board is running a real application?

The 360×360 pixel grid gives a square 1.85 inch canvas suited to circular UI layouts, icons and graphics rendered through the QSPI-connected ST77916 driver.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.