Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Small rectangular mono camera board with 110° lens and global shutter sensor

LORDWORLD

LORDWORLD OV9281-120 Mono Camera 110°FOV Global Shutter 1MP

SKU CH-CVHR-HDDPG

Monochrome global-shutter camera captures fast motion without rolling-shutter distortion and connects directly to Raspberry Pi boards

  • Global shutter eliminates jello effect on fast motion
  • 110° field of view captures wide scenes
  • 1 MP global-shutter sensor suits high frame-rate capture
  • Direct connection to Raspberry Pi 4B, 3B+, 3A+, 3B, 2B, B+, A+
  • Extra FPC cable needed for Zero and Zero 2 W

Global shutter camera for Raspberry Pi

The LORDWORLD OV9281-120 is a 1MP mono camera module with a 110° field of view designed for Raspberry Pi boards. Its global shutter removes the jello effect that distorts fast-moving subjects. The module suits developers and hobbyists building machine-vision or robotics projects that need crisp frames at high frame rates.

Direct CSI connection with Zero caveat

The camera plugs straight into the CSI port on Raspberry Pi 4B, 3B+, 3A+, 3B, 2B, B+ and A+ boards without extra hardware. For Zero and Zero 2 W boards a separate FPC cable is required, so plan the cable purchase before assembly. The compact board adds minimal bulk to a Pi enclosure.

Upgrades rolling-shutter modules for motion clarity

This module replaces standard rolling-shutter cameras when motion blur or skew makes footage unusable. The jump is worth it for drone navigation, conveyor inspection or any scene where objects move across the frame faster than a rolling shutter can scan. Buyers who need colour imaging or higher resolution should look elsewhere.

Kohokohdat

  • Global shutter eliminates jello effect on fast motion
  • 110° field of view captures wide scenes
  • 1 MP global-shutter sensor suits high frame-rate capture
  • Direct connection to Raspberry Pi 4B, 3B+, 3A+, 3B, 2B, B+, A+
  • Extra FPC cable needed for Zero and Zero 2 W

Tekniset tiedot

BrandLORDWORLD

Kysymyksiä tästä tuotteesta

What interface does the OV9281-120 use and what Raspberry Pi models does it support directly?

The camera connects directly to Raspberry Pi 4B, 3B+, 3A+, 3B, 2B, B+ and A+ via the CSI port. For Zero and Zero 2 W boards an extra FPC cable is required.

What physical clearance does the 110° field of view need for mounting?

The 110° field of view requires an unobstructed wide-angle line of sight; ensure the mounting surface allows the lens to see the full scene without vignetting from enclosure edges.

How is the camera installed on a Raspberry Pi and what step is often missed?

Insert the FPC cable into the CSI connector with the contacts facing the correct direction, secure the latch, then enable the camera interface in raspi-config; many users forget to enable the interface before testing.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.