Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with four SATA ports and PCIe edge connector

LORDWORLD

LORDWORLD PCIe to 4-Ch SATA 3.0 Expander development board

SKU CH-TY6Q-22FZG

Adds four SATA 3.0 ports at 6Gbps through a single PCIe lane with AHCI 1.4 and multiple power-saving modes

  • Four SATA 3.0 ports at 6Gbps expand storage capacity
  • PCI Express lane with SRIS, AER, LTR boosts data integrity
  • NCQ and AHCI 1.4 support optimises command efficiency
  • L1 sub-state plus four power modes cut idle consumption
  • SATA LED indicator simplifies drive status monitoring

PCIe-to-SATA expansion board for CM4

This development board adds four SATA 3.0 ports to a Compute Module 4 carrier via a single PCI Express lane. It is designed for makers and engineers building storage appliances, NAS prototypes or test rigs that need direct SATA connectivity without USB bottlenecks.

Four 6 Gbps ports with port-multiplier switching

The controller presents four independent SATA 3.0 channels and handles switching through standard port-multiplier commands. NCQ and AHCI 1.4 support keep command queues efficient while the PHY runs at the full 6 Gbps link rate.

Low-power states and LED activity indication

Four link power modes (L0s, L1, L23, L3) plus L1 sub-state cut idle draw to a minimum. AER, LTR and SRIS support let the host manage errors and latency without extra firmware work. On-board SATA LEDs show per-port activity during normal operation.

Kohokohdat

  • Four SATA 3.0 ports at 6Gbps expand storage capacity
  • PCI Express lane with SRIS, AER, LTR boosts data integrity
  • NCQ and AHCI 1.4 support optimises command efficiency
  • L1 sub-state plus four power modes cut idle consumption
  • SATA LED indicator simplifies drive status monitoring

Tekniset tiedot

BrandLORDWORLD

Kysymyksiä tästä tuotteesta

How many SATA 3.0 drives can run at 6Gbps through the single PCI Express channel?

Four SATA 3.0 ports share one PCI Express lane, so the 6Gbps per port is the interface ceiling; combined throughput is limited by that single lane.

What does AHCI SPEC 1.4 and NCQ support mean for drive command handling?

The board implements AHCI 1.4 with Native Command Queuing, letting the host queue and reorder commands across all four SATA ports for lower latency.

What physical space and connector layout does the expander need to mount four SATA cables?

The development board exposes four standard SATA 3.0 data connectors plus power pins, requiring enough clearance for four cables and the PCI Express edge connector.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.