Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Small green circuit board with USB-C port and two rows of gold pins

LORDWORLD

LORDWORLD RP2040-Plus Mini Board with Pre-Soldered Header development board

SKU CH-Y0PG-ZYQEJ

Pico-compatible RP2040 board with pre-soldered headers, 4 MB flash, USB-C, higher-current DC-DC and 26 multi-function GPIOs running up to 133 MHz

  • Dual-core Arm Cortex M0+ runs up to 133 MHz for responsive embedded performance
  • 4 MB onboard flash stores larger firmware without external memory
  • USB-C connector simplifies power and data with a reversible cable
  • 26 multi-function GPIO pins enable flexible peripheral integration
  • Pre-soldered header allows immediate breadboard use and Pico add-on compatibility

RP2040-Plus Mini Board for embedded projects

The LORDWORLD RP2040-Plus is a Pico-like development board built around the Raspberry Pi RP2040 microcontroller. It targets makers, students and engineers who need a compact platform for IoT edge devices, sensor interfaces or custom firmware. The board ships with headers pre-soldered for immediate breadboard use.

Upgrade from the standard Pico

Compared with the reference Pico, this Plus version adds 4 MB of onboard Flash, a USB-C connector and a higher-current DC-DC regulator. The jump is worth it when projects exceed the 2 MB Flash limit, require the more durable USB-C port or need extra headroom for power-hungry add-on modules.

Sustained 133 MHz dual-core operation

Under continuous load the dual-core Arm Cortex M0+ processor maintains its 133 MHz clock while the upgraded DC-DC chip delivers consistent current to the 26 multi-function GPIO pins. This prevents brown-outs during long data-logging runs or when driving multiple peripherals simultaneously.

Kohokohdat

  • Dual-core Arm Cortex M0+ runs up to 133 MHz for responsive embedded performance
  • 4 MB onboard flash stores larger firmware without external memory
  • USB-C connector simplifies power and data with a reversible cable
  • 26 multi-function GPIO pins enable flexible peripheral integration
  • Pre-soldered header allows immediate breadboard use and Pico add-on compatibility

Tekniset tiedot

BrandLORDWORLD

Kysymyksiä tästä tuotteesta

What spacing do the 26 GPIO pins use for mounting add-on modules?

The board matches the Raspberry Pi Pico pinout, so standard Pico headers and HATs align with the 26 multi-function GPIO pins.

Which USB connector is used for flashing firmware, and what common mistake should I avoid?

A USB-C connector provides power and data; the frequent error is using a charge-only cable that lacks data lines, which prevents the RP2040 from entering bootloader mode.

Does the 4 MB flash require any periodic refresh or wear-levelling maintenance?

No, the onboard 4 MB flash is standard non-volatile memory and needs no scheduled refresh or wear-levelling by the user.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.